[mrtg] Re: polling ATM sub-interfaces on cisco 6509

[Greg.Volk at edwardjones.com]

> Questions
> 
> Are there any particular cfgmaker flags to use for ATM sub-interfaces?
> 

I use the following config options...

cfgmaker '--if-filter=($default && not $if_is_ciscovlan)' 
--snmp-options=:::::2 --ifref=descr --ifdesc=descr --global 
"Options[_]: growright,bits" --subdirs=HOSTNAME public at router

...when building configs for my 6509's.

I have eight 6509's that have ATM interfaces in them. They
are OC-3 port adaptors installed into flexwan (WS-X6182-2PA) 
blades.

I am using snmpv2c counters on these targets. Here is the config 
for one of the subinterfaces...(this is the result of the 
cfgmaker command line above - I'm not using interface numbers
for ifref)...Other than changing the routername and comm string
via search and replace, this is exactly how it appears in 
my config files...

Target[myrouter_ATM7_0_0.23-aal5_layer]: \ATM7/0/0.23-aal5\ 
layer:public at myrouter:::::2
Directory[myrouter_ATM7_0_0.23-aal5_layer]: myrouter
MaxBytes[myrouter_ATM7_0_0.23-aal5_layer]: 18720000
Title[myrouter_ATM7_0_0.23-aal5_layer]: 
ATM7/0/0.16_ATM7/0/0.23-aal5-layer
PageTop[myrouter_ATM7_0_0.23-aal5_layer]: <h1>ATM7/0/0.23-aal5 layer -- 
myrouter</h1>

> Does mrtg 'really" send all these snmp v1 polls on an atmsubif?

Check with tcpdump/snoop/netmon on your server or debug snmp on 
the cisco.

> SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System
> Software
> IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD,
> RELEASE SOFTWARE (fc2)
>

I'm running IOS 12.1(22)E1.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi