[mrtg] Cisco 6509 CPU Utilization

[Tyler Woods]

Okay, MRTG is creating the graph but not collecting data. From the Red 
Hat server MRTG is on I can get SNMP info from snmpget for the CPU just 
fine. Below is the config file and error I'm getting. Please help?

Config:
WithPeak[_]: dwmy

Target[10.6.252.254-cpu]: 
1.3.6.1.4.1.9.2.1.56.0 at 1.3.6.1.4.1.9.2.1.56.0:2bon2b at 10.6.252.254:
Title[10.6.252.254-cpu]: CPU Utilization on BA-6509-SW-02
PageTop[10.6.252.254-cpu]: <H1>CPU Utilization on BA-6509-SW-02</H1>
Options[10.6.252.254-cpu]: growright, gauge, nopercent, integer
MaxBytes[10.6.252.254-cpu]: 100
Unscaled[10.6.252.254-cpu]: dwmy
YLegend[10.6.252.254-cpu]: % of CPU Used
ShortLegend[10.6.252.254-cpu]: %
LegendI[10.6.252.254-cpu]: CPU Used:
Legend1[10.6.252.254-cpu]: CPU Utilization

Error:
2005-08-17 14:56:40 -- ERROR: Target[10.6.252.254-cpu][_IN_] 
'1.3.6.1.4.1.9.2.1.56.0 at 1.3.6.1.4.1.9.2.1.56. $target->[0]{$mode} ' 
(warn): (Missing operator before ?)
2005-08-17 14:56:40 -- ERROR: Target[10.6.252.254-cpu][_OUT_] 
'1.3.6.1.4.1.9.2.1.56.0 at 1.3.6.1.4.1.9.2.1.56. $target->[0]{$mode} ' 
(warn): (Missing operator before ?)

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi