[mrtg] Re: graphs not being built

[Aaron Clasby]

Yes, RRDTOOL is being utilized.

Here is a bit of what I have, I took out most of the stuff because its
quite a few pages worth in full.

# Created by
# /usr/bin/cfgmaker --ifref=descr --global 'WorkDir: /home/mrtg/html'
--global 'Options[_]: bits,growright' --output /home/mrtg/cfg/mrtg.cfg
foobar at 172.20.150.202


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no
WorkDir: /home/mrtg/html
Options[_]: bits,growright
Logdir: /home/mrtg/logs


######################################################################
# System:
# Description: Ethernet Stackable Switching System
# Contact:
# Location:
######################################################################


### Interface 1 >> Descr: '' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * --ifref=descr is not unique for this interface
#
 Target[172.20.150.202_1]: 1:c1cada at 172.20.150.202:
 SetEnv[172.20.150.202_1]: MRTG_INT_IP="" MRTG_INT_DESCR="SW3 port 1"
 MaxBytes[172.20.150.202_1]: 12500000
 Title[172.20.150.202_1]: Traffic Analysis for 1 --
 PageTop[172.20.150.202_1]: <H1>Traffic Analysis for 1 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>100.0 Mbits/s</TD></TR>
 </TABLE>


### Interface 2 >> Descr: '' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
### * --ifref=descr is not unique for this interface
#
 Target[172.20.150.202_2]: 2:c1cada at 172.20.150.202:
 SetEnv[172.20.150.202_2]: MRTG_INT_IP="" MRTG_INT_DESCR="SW3 port 2"
 MaxBytes[172.20.150.202_2]: 12500000
 Title[172.20.150.202_2]: Traffic Analysis for 2 --
 PageTop[172.20.150.202_2]: <H1>Traffic Analysis for 2 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>100.0 Mbits/s</TD></TR>
 </TABLE>





On 12/6/05, William Owen <william.owen at profilesmail.com> wrote:
> Dare I ask, but are you using RRDTool as a backend?  If so, MRTG won't make
> any graphs.  You will need to pick and configure a front-end.  Pasting your
> cfg to the list will help to sort out anything like that.
>
> -----Original Message-----
> From: Cook, Garry [mailto:gwcook at arcadis-us.com]
> Sent: Tuesday, December 06, 2005 5:55 PM
> To: Aaron Clasby; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: graphs not being built
>
> Restart MRTG?
>
> --
> Garry
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
> On Behalf Of Aaron Clasby
> Sent: Tuesday, December 06, 2005 4:49 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] graphs not being built
>
> I ran through the FAQ's, but I am still a bit lost.
> Graphs for my switches are not being built by mrtg. I ran the
> configmaker against the new host and it made the config for all the
> switchports and I took that information and added it to the production
> mrtg config, but its not creating the graphs. What am I missing? I am
> sure its something simple.
>   :-(
>
> If there are any details that I left out that would aid in your helping
> me, please let me know and I will pass along any additional nfo as
> needed.
>
> --
> Aaron
> skitzsofrenick at gmail.com
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://lists.ee.ethz.ch/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://lists.ee.ethz.ch/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://lists.ee.ethz.ch/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>
>


--
Aaron Clasby
skitzsofrenick at gmail.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi