[mrtg] Re: No stats in my graphs

[Cory Casler]

The reason is because you don't have anything defined in your in your
LegendI, Legend0, and possibly your ShortLegend.  If you have to just
put a non-breaking space like so:
LegendI[xxx]:  
LegendO[xxx]:  
ShortLegend [xxx]:  

This should fix you problem.
 
 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Guillermo Hechem
Sent: Thursday, February 17, 2005 7:33 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: No stats in my graphs

I`m using 14all.cgi to generate the graphs. But if you forget about
rrdtool,
which means MRTG running alone with the same configuration file but
without
these lines:

LogFormat: rrdtool
PathAdd: c:\rrdtool\bin
LibAdd: C:\Perl\site\lib\ppm-conf

the results were the same. Good graphs but no stats...

----- Original Message ----- 
From: "William Owen" <william.owen at profilesmail.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, February 16, 2005 5:49 PM
Subject: [mrtg] Re: No stats in my graphs


> You say that you are using RRDTool as a backend.  If that is the case
and
> your rrd files are getting updated, it is more than likely a
configuration
> issue with the front-end you are using to generate your graphs as most
of
> them give you the ability to specify/omit most elements of the graph. 
> What
> are you using as a front-end?

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi