[mrtg] Configmaker questions

[Ronald I. Nutter]

Here is an example of how I have configmaker generating config files.  I
have been looking for a way to put the data on the Port Name line after
the -- on the Title and Pagetop lines.  Is there a way to do this ?  I
have tried different combinations of settings and havent found how to do
it so far -

### Interface 12 >> Descr: '' | Name: '2/1' | Ip: '' | Eth:
'00-0a-41-13-6b-d0' ###

Target[10.29.4.4_2_1]: #2/1:mrtg at 10.29.4.4:
SetEnv[10.29.4.4_2_1]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[10.29.4.4_2_1]: 1250000
Title[10.29.4.4_2_1]: Traffic Analysis for 2/1 -- 
PageTop[10.29.4.4_2_1]: <H1>Traffic Analysis for 2/1 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>2/1</TD></TR>
   <TR><TD>Port Name:</TD>  <TD>011DD3</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
 </TABLE>


Also, is there a way I can get cfgmaker to not put the #'s in front of
the information for a port that is down because the workstation isnt
connected at the point I run cfgmaker ?  Havent found a way to do that
either.  For both questions, I am talking to a Cisco 6509 Catalyst
switch.

Thanks,
Ron

--------------------------------------------------------------------
Ron Nutter                          ron_nutter at georgetowncollege.edu 
Network Infrastructure & Security Manager
Information Technology Services                        (502)863-7002
Georgetown College                                     
Georgetown, KY                                            40324-1696
--------------------------------------------------------------------
 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Rob Kudyba
Sent: Thursday, January 20, 2005 5:20 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cfgmaker errors: SNMP_util.pm line 627 & v4only at
./cfgmaker line 796


Installing on Linux RH8, having some difficulty using cfgmaker.
mrtg-2.11.1. IP changed obviously...

./cfgmaker --global 'WorkDir: /path/to/html' --global 'Options[_]:
bits,growright' --output /path/to/mrtg.cfg public at 192.168.xx.yy

--base: Get Device Info on public at 192.168.xx.yy:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.xx.yy" [192.168.xx.yy].161)
                  community: "public"
                 request ID: -1726724283
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
at /usr/local/src/mrtg-2.11.1/bin/../lib/mrtg2/SNMP_util.pm line 627
SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 192.168.xx.yy::::::v4only
at ./cfgmaker line 796
WARNING: Skipping public at 192.168.xx.yy: as no info could be retrieved

--base: Writing /path/to/mrtg.cfg

/sbin/ifconfig
eth0      Link encap:Ethernet  HWaddr 00:E0:18:03:zz:qq
          inet addr: 192.168.xx.yy  Bcast:192.168.aa.bb
Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4056298 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4192560 errors:0 dropped:0 overruns:0 carrier:0
          collisions:144994 txqueuelen:100
          RX bytes:1601205426 (1527.0 Mb)  TX bytes:952633043 (908.5 Mb)
          Interrupt:20 Base address:0x5000


Thanks,

Rob
http://www.messagepartners.com/


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi