[mrtg] Netgear WG302 & MRTG
Ashley Morrison
AshleyM at SMC.sa.edu.au
Tue Jun 7 04:55:15 MEST 2005
Greetings,
I have been attempting to get a Netgear WG302, firmware 3.0.7 to graph
under MRTG. I am running MRTG/RRDTool/Routers2 with great success
(thanks once again to all who helped make these sessional pieces of
software) but I can only get empty graphs with this device.
I used cfgmaker to make the initial Config, but all interfaces were
remarked out, so I enabled all of them in the Config, but all come up
empty. Does anyone know of a special OID that needs to be used, on
their website they say it supports MIB I & II.
below is the config, names & ip's changed to protect the guilty...
------------------------------------------------------------------------
--
######################################################################
# System: Rm25AP
# Description: NETGEAR WG302 3.0.7
# Contact:
# Location:
######################################################################
### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: ''
###
### The following interface is commented out because:
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.1)
### SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
### community: "<something-here>"
### request ID: 36302426
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to
query
#
Target[1.1.1.1_1]: 1:<something-here>@1.1.1.1:
SetEnv[1.1.1.1_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
MaxBytes[1.1.1.1_1]: 12500000
Title[1.1.1.1_1]: Traffic Analysis for 1 -- Rm25AP
PageTop[1.1.1.1_1]: <H1>Traffic Analysis for 1 -- Rm25AP</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Rm25AP in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>lo </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>127.0.0.1
(localhost.localdomain)</TD></TR>
# </TABLE>
### Interface 2 >> Descr: 'ixp0' | Name: '' | Ip: '0.0.0.0' | Eth: ''
###
### The following interface is commented out because:
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.2)
### SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
### community: "<something-here>"
### request ID: 36302427
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to
query
#
# Target[1.1.1.1_2]: 2:<something-here>@1.1.1.1:
# SetEnv[1.1.1.1_2]: MRTG_INT_IP="0.0.0.0" MRTG_INT_DESCR="ixp0"
# MaxBytes[1.1.1.1_2]: 0
# Title[1.1.1.1_2]: Traffic Analysis for 2 -- Rm25AP
# PageTop[1.1.1.1_2]: <H1>Traffic Analysis for 2 -- Rm25AP</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Rm25AP in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>ixp0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>0.0.0.0 ()</TD></TR>
# </TABLE>
### Interface 3 >> Descr: 'ixp1' | Name: '' | Ip: '' | Eth:
'00-02-b3-02-02-02' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.3)
### SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
### community: "<something-here>"
### request ID: 36302428
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to
query
#
# Target[1.1.1.1_3]: 3:<something-here>@1.1.1.1:
# SetEnv[1.1.1.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="ixp1"
# MaxBytes[1.1.1.1_3]: 0
# Title[1.1.1.1_3]: Traffic Analysis for 3 -- Rm25AP
# PageTop[1.1.1.1_3]: <H1>Traffic Analysis for 3 -- Rm25AP</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Rm25AP in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>ixp1 </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
### Interface 4 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.4)
### SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
### community: "<something-here>"
### request ID: 36302429
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to
query
#
# Target[1.1.1.1_4]: 4:<something-here>@1.1.1.1:
# SetEnv[1.1.1.1_4]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
# MaxBytes[1.1.1.1_4]: 0
# Title[1.1.1.1_4]: Traffic Analysis for 4 -- Rm25AP
# PageTop[1.1.1.1_4]: <H1>Traffic Analysis for 4 -- Rm25AP</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Rm25AP in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>eth0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
### Interface 5 >> Descr: 'bridge0' | Name: '' | Ip: '1.1.1.1' | Eth: ''
###
### The following interface is commented out because:
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.5)
### SNMPv1_Session (remote host: "1.1.1.1" [1.1.1.1].161)
### community: "<something-here>"
### request ID: 36302430
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to
query
#
Target[1.1.1.1_5]: 5:<something-here>@1.1.1.1:
SetEnv[1.1.1.1_5]: MRTG_INT_IP="1.1.1.1" MRTG_INT_DESCR="bridge0"
MaxBytes[1.1.1.1_5]: 12500000
Title[1.1.1.1_5]: Traffic Analysis for 5 -- Rm25AP
PageTop[1.1.1.1_5]: <H1>Traffic Analysis for 5 -- Rm25AP</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Rm25AP in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>bridge0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>Other (1)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>1.1.1.1 ()</TD></TR>
# </TABLE>
------------------------------------------------------------------------
-------------------------------------------------
Cheers ... Ash
Ashley Morrison, MCSE MCP DCE
Network Administrator
St. Michael's College
15 Mitton Ave
Henley Beach, SA, 5022
Ph: +61 8 8356 5966
Internet: www.smc.sa.edu.au <http://www.smc.sa.edu.au/>
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
More information about the mrtg
mailing list