[mrtg] Re: Increasing interval problem

[Jon]

Ok, I see what's going on.  I'll delete the log files and create new ones
with 60 minute interval.

Thanks.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of PAUL WILLIAMSON
Sent: Friday, June 24, 2005 3:21 PM
To: MRTG at list.ee.ethz.ch
Subject: [mrtg] Re: Increasing interval problem

So you're telling it you'll be polling every minute, then you poll every
10 
minutes?  I have a feeling your counter is wrapping (maybe) at about 
10 minutes, which would explain why you can poll any less frequently.

The polling interval can't be changed after you've set up your log
files.
All entries in the file are based on that interval.  Set the interval 
you intend to poll on when you first set up MRTG, and you'll get 
much better results.

Paul

>>> Jon <jonsml at gmail.com> 06/24/05 3:14 PM >>>
I have the Interval: option set at 60 when I first create the rrd
files.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On
Behalf Of PAUL WILLIAMSON
Sent: Friday, June 24, 2005 2:49 PM
To: MRTG at list.ee.ethz.ch 
Subject: [mrtg] Re: Increasing interval problem

What is your Interval setting set to?

That should be set in your config files.  I think you 
also need that to be set during the creation of 
your log files (if on old .log files) to be set properly.
Although I may be wrong on that one.

Simply adjusting the polling without setting the 
Interval: option doesn't do much, other than lower the 
utlization statistics.

Paul

>>> Jon <jonsml at gmail.com> 06/24/05 2:40 PM >>>
Hi all,
I'm currently having problems setting the interval value beyond 10
minutes.

My system is:
Windows 2003
Mrtg 2.11.1
Rrdtool 1.0.49
Routers2 2.14

While everything else works great except when I want to increase the
interval to 30 minutes.  First I use a schedule task to call mrtg
every
30
minutes but that didn't work.  Then I use wperl and 'RunAsDaemon' mode
to
run it as a background service and it still didn't work.  So I kept
lowering
the interval and it worked with 10 minutes interval.

Thanks,

Jon


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://lists.ee.ethz.ch/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://lists.ee.ethz.ch/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://lists.ee.ethz.ch/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi