[mrtg] Re: CPU & Memory usage template.

[rglauser at areaofficeonaging.com]

 I have tried their templates but they don't seem to give the complete
OID.  

-----Original Message-----
From: Stefano Giraldo [mailto:stefano at neotokyo3.it] 
Sent: Wednesday, March 09, 2005 3:12 AM
To: RL Glauser; mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Re: CPU & Memory usage template.

Hi,
try to use the SOMIX MRTG repository templates.
Look here:
http://www.somix.com/support/mrtg_repository.php?cmd=vendor&vendor=10&ve
ndor_name=Cisco

They always work fine.

Bye,

        Ste.

----- Original Message -----
From: <rglauser at areaofficeonaging.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, March 07, 2005 10:13 PM
Subject: [mrtg] Re: CPU & Memory usage template.


> I was able to adapt your script to work on a Cisco 3550 switch and it
> works well. When I try to adapt it to Cisco 2600 series routers I only
> get intermittent bits of data as if to suggest that the router isn't
> working. When I do a MIBwalk I can find the 5sec and 5min OID's and
they
> are reporting data. I would think that the CPU on a router would be
just
> as busy as the switch, but that doesn't seem to be the case. I am
using
>
1.3.6.1.4.1.9.9.109.1.1.1.1.6.1&.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1:communi
> ty at X.X.X.X.
> Any ideas?
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
> On Behalf Of Jon Krause
> Sent: Saturday, March 05, 2005 12:01 PM
> To: chanapli knap; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: CPU & Memory usage template.
>
>
> ----- Original Message -----
> From: "chanapli knap"
> Sent: Saturday, March 05, 2005 11:35 AM
> Subject: [mrtg] CPU & Memory usage template.
>
>
> : Do anyone has a template for CPU and Mem usage for
> : Cisco Catalyst switches (45xx ,29xx, 35xx) please..
> :
> :
>
>
> ##################################
>
> This will work for 5min / 5sec CPU utilization for Cisco Catalyst 2900
> switches (most, check any deviation of OID's from different Cisco
IOS's-
> YMMV)
>
> If you have support access to Cisco use:
>  http://www.cisco.com/cgi-bin/Support/Mibbrowser/unity.pl?tab=2
>
> Substitute the proper OID (twice) for mem usage, also adjust target
> [target]
> and other parameters (Legends and Page Tops, etc) for a mem usage
> template.
>
> Hope that helps, Jon
>
> ##################################
>
> WorkDir: /path/to/work/dir
>
>
Target[catl-cpu]:1.3.6.1.4.1.9.9.109.1.1.1.1.5.1&1.3.6.1.4.1.9.9.109.1.1
> .1.1
> .3.1:communitystring at 123.123.123.12
> MaxBytes[catl-cpu]: 100
> Title[catl-cpu]: Catalyst 2924 : CPU Utilization by Percentage
> Options[catl-cpu]: gauge,growright
> Unscaled[catl-cpu]: dmwy
> YLegend[catl-cpu]: Percent of Processor Utilization
> ShortLegend[catl-cpu]: Percent
> Legend1[catl-cpu]: 5 min CPU Utilization
> Legend2[catl-cpu]: 5 sec CPU Utilization
> LegendI[catl-cpu]: 5 min CPU Utilization
> LegendO[catl-cpu]: 5 sec CPU Utilization
> PageTop[catl-cpu]: <H1>Catalyst Processor Utilization</H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>Catalyst 2924 Processor
Utilization</TD></TR>
>    <TR><TD>IP:</TD><TD>123.123.123.12</TD></TR>
>    <TR><TD>Max:</TD>
>        <TD>100%</TD></TR>
>   </TABLE>
>
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi