[mrtg] Re: MaxBytes issues?

[Koelstra, J. (Jan)]

My suspection is that you use the default 32 bit counters and not the 64 bit counters.
For details about the 64 bit counters have a look at: http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html#item_snmpv2c

Hth,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of securityadmin
Sent: Wednesday, May 18, 2005 3:01 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MaxBytes issues?


Hello guys, I've read and read but I've yet to find a solution for my issue.

I'm running 2.12.1 the latest version of mrtg, also the latest version of rrdtool.

I tried with cacti and a regular stock mrtg, built the config from scratch.

My previous config a while ago was putting multiple targets into one log and graph output.. community at ip + community at ip + community at ip I noticed that the graphs and output would have issues after 108mbit, it'd just drop to something like 5402kb/s or something it felt like doing.

Currently have a Riverstone RS8000 router and it's just one interface, gi.6.2, same thing is happening, at 108mbit it drops in the graph but the real amount of bandwidth doesn't drop on the network.

My MaxBytes is 125000000 and one of my friends told me to try AbsMax 125000000 also but I do not see a difference.

I'm using the solar winds.net remote monitor bandwidth gauge and it shows me doing 125mbit right now and I'm polling every 30 seconds. This is really cpu intensive and annoying but if that software is working, that is proof that the router and the previous hosts I used to use it with do not have any issues.. I've seen people with these issues and others just mention to use maxbytes, but it is not helping me. I have a graph for anyone who would like to respond. Thanks!

j

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi