[mrtg] Re: avoiding peaks

Koelstra, J. (Jan) JKoelstra at MINSZW.NL
Thu Nov 17 14:48:05 MET 2005


Richard,

Some ways to smooth peaks are the "logscale" and "secondmean" options.

For details see: http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html

If I understand you correctly however you want to avoid the too-high value in your graph completely. To achieve this changing the maxbytes value is the only way to go. If you know for sure the maxbytes value will never be reached it is an option to lower the MaxBytes value in your config file. Be aware that this will make the percentage figures below the graphs useless (in case you have the percentage displayed).

HTH,

Jan.


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of richard lucassen
Sent: Thursday, November 17, 2005 12:11 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] avoiding peaks


Hello list,

I use mrtg with tap-devices, normally no problem, but when a hicup occurs somewhere it gets wrong data from snmpd. The result of this is that the graph is scaled down because of an enormous peak. I use "MaxBytes" but is there another option to smooth these peaks?

http://www.xaq.nl/divers/peak-mrtg.png

R.

--
___________________________________________________________________
It is better to remain silent and be thought a fool, than to speak aloud and remove all doubt.

+------------------------------------------------------------------+
| Richard Lucassen, Utrecht                                        |
| Public key and email address:                                    |
| http://www.lucassen.org/mail-pubkey.html                         |
+------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the mrtg mailing list