[mrtg] Re: Problems with mrtg returning 0

[Nick D]

Jan,

Il give that a go, but shouldn't the log files still show the new values,
and an increase of 40+, rather than just 0, or is that affected aswell?

Nick

----- Original Message ----- 
From: "Koelstra, J. (Jan)" <JKoelstra at MINSZW.NL>
To: "Nick D" <mrtg_list at coolnicks.co.uk>
Sent: Monday, February 20, 2006 2:38 PM
Subject: RE: [mrtg] Re: Problems with mrtg returning 0



Nick,

By default MRTG shows the rate per second. To display slow increasing
counters you can use the 'perminute'  or 'perhour' options at the options
line in the config.
If even perhour shows mainly zeroes it is worth considering using the gauge
option.

HTH,

Jan.


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Nick D
Sent: Monday, February 20, 2006 2:33 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problems with mrtg returning 0


I have about 15 other graphs which are working, or nearly there, but these 3
IIS ones arnt working, ive checked with the packet monitor and the values
area increasing each time, but it isnt being logged. First it returns 35366
then 35402 but there is only 0s in the log file.

:: nick dell
:: programming, hosting &  web design
:: hosting.coolnicks.co.uk
----- Original Message -----
From: <Scott_Rochford at DELL.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, February 20, 2006 1:20 PM
Subject: [mrtg] Re: Problems with mrtg returning 0


> > Im using MRTG to monitor IIS on a windows 2000 server box, the
> > problem is the first time the script is run it returns the value
> > fine, then afterwards it always returns 0, even though from a packet
> > capture the win2000 box is returning the right value with no errors.
> > This is happening with multiple items.
> > 1140438036 34792 121
> > 1140438036 0 0 0 0
> > 1140438021 0 0 0 0
> >
> > YLegend[iis.getpost]: GETS/POSTS
> > Options[iis.getpost]: growright,nopercent,integer
>
> Each of the subsequent lines in the log file is recording the
> difference between the current value and the previous one, so it is
> probably correct.
>
> It may be more appropriate to use the 'gauge' option for this
> parameter.  See the appropriate secion in the configuration reference:
>
> http://people.ee.ethz.ch/~oetiker/webtools/mrtg/doc/mrtg-reference.en.
> ht
> ml
>
> Regards,
>
> Scott.
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://lists.ee.ethz.ch/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke
aansprakelijkheid uit in verband met het niet juist, onvolledig of niet
tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet
voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de
inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any
incorrect or incomplete transmission of the information in this e-mail or
for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and
delete its content.
_________________________________________________________


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi