[mrtg] Trying to setup a mrtg.cfg file for SonicWall Pro 2040

[Travis Rabe]

Does anyone have a sample file to share for monitoring bandwidth, CPU and
memory?  This was very straight forward with my Ciscos, but it seems to fail
when I try to run the following command against my sonicwall.
 

 

perl cfgmaker public at 10.10.10.1 --global "WorkDir: c:\test" --output
mrtg_SW.cfg

 

It always fails with:

 

 

 

--base: Get Device Info on public at 10.10.10.1:

SNMP Error:

no response received

SNMPv1_Session (remote host: "10.10.10.1" [10.10.10.1].161)

                  community: "public"

                 request ID: -830670993

                PDU bufsize: 8000 bytes

                    timeout: 2s

                    retries: 5

                    backoff: 1)

 at C:/mrtg-2.10.15/bin\..\lib\mrtg2/SNMP_util.pm line 627

SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 10.10.10.1::::::v4only

 at cfgmaker line 831

WARNING: Skipping public at 10.10.10.1: as no info could be retrieved

 

--base: Writing mrtg_SW.cfg

 

Any ideas?



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi