[mrtg] Re: Scaling not working

Anson Rinesmith arinesmith at bigrivertelephone.com
Mon Jun 5 15:56:18 MEST 2006


If you always want it to display the max, then you are looking for UNSCALED.
I'm not sure how routers.cgi works, but I use
Unscaled[_]: dwmy
To display all of my graphs as unscaled. 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of John Oliver
Sent: Friday, June 02, 2006 3:38 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Scaling not working

I have config files for memory utilization on two machines:

[root at mrtg etc]# cat obrien-mem.conf
Target[obrien-mem]:
1.3.6.1.2.1.25.2.3.1.6.2&1.3.6.1.2.1.25.2.3.1.6.2:public at obrien:
routers.cgi*Options[obrien-mem]: scaled
Options[obrien-mem]: growright, gauge
MaxBytes[obrien-mem]: 5126848
Title[obrien-mem]: Memory Utilization for obrien.impactengine.com
(presentationengine.com)
PageTop[obrien-mem]: <H1>Memory Utilization for obrien.impactengine.com
(presentationengine.com)</H1>
YLegend[obrien-mem]: # Gigabytes in use
ShortLegend[obrien-mem]: GB
Colours[obrien-mem]: YELLOW#F9C000,RED#F90000,DARK
GREEN#006600,VIOLET#FF00FF
Legend1[obrien-mem]:  GB
LegendI[obrien-mem]:  GB:
LegendO[obrien-mem]:
[root at mrtg etc]# cat riker-mem.conf
Target[riker-mem]:
1.3.6.1.2.1.25.2.3.1.6.2&1.3.6.1.2.1.25.2.3.1.6.2:public at riker:
routers.cgi*Options[riker-mem]: scaled
Options[riker-mem]: growright, gauge
MaxBytes[riker-mem]: 5126848
Title[riker-mem]: Memory Utilization for riker.impactengine.com
(flashadengine.com)
PageTop[riker-mem]: <H1>Memory Utilization for riker.impactengine.com
(flashadengine.com)</H1>
YLegend[riker-mem]: # Gigabytes in use
ShortLegend[riker-mem]: GB
Colours[riker-mem]: YELLOW#F9C000,RED#F90000,DARK
GREEN#006600,VIOLET#FF00FF
Legend1[riker-mem]:  GB
LegendI[riker-mem]:  GB:
LegendO[riker-mem]:

The graph for "obrien" displays the way I want... the top of the graph
always reads 5GB and the graph is drawn under it.  But the graph for
"riker" is always unscaled... the top of the graph changes according to
the highest reading shown.  I'm stumped!

-- 
***********************************************************************
* John Oliver                             http://www.john-oliver.net/ *
*                                                                     *
***********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the mrtg mailing list