[mrtg] Re: Can mrtg calculate only on value?

[Scott_Rochford at DELL.com]

Simply by leaving the LegendO and Legend2 completely blank on your
config file.

Your perl script will still need to return two values for MRTG to
correctly interpret the output however, but you can just return 0 for
the second parameter.

Regards,

Scott. 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of john
Sent: 18 June 2006 17:20
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Can mrtg calculate only on value?

Well, I use a perl script that returns one value (integer)

Probably, I don't use the rddtool but the rateup.

I read the mrtg wants two value the ingoing and the outgoing numbers.

What if I have one value?






-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On
Behalf Of MrPaul
Sent: Sunday, June 18, 2006 5:15 PM
To: john
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Can mrtg calculate only on value?

On 6/18/06, john <isofroni at cc.uoi.gr> wrote:
>
> I want to remove the out Legend from  the graphs.
>
>
> Can this be done?

If you are wanting someone to tell you how to do do this then we'll need
additional information.  How are you creating your graphs?  Rateup,
rrdtool
direct, some cgi script.

If you just want someone to answer your question....the answer is yes.

Paul


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi