[mrtg] Re: Foundry MIB

[Muhammed Ali]

Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
You have configured Maxbytes to 100 Mb only, then anything above 100 mb will
be dropped  by MRTG. Increase the Maxbytes to your interface speed. 

 

Regards

Muhammed Ali

 



 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Mir Hafeez Ali
Sent: Saturday, October 28, 2006 5:41 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Foundry MIB

 

Hi everyone,

 

 

I am not able to read the traffic above 100MB from the Gig Interface on

Foundry JetCore Switch.  I allowed the configuration to use SNMP V 2 also.

 

 

 

Following is the configuration.  Please someone help if they know anything

about this.

 

 

 

### Interface 65 >> Descr: 'GigabitEthernet2/1' | Name: 'ethernet2/1' | Ip:

'212.107.116.242' | Eth: '00-0c-db-7f-f5-20' ###

 

 

 

Target[foundry2]: 65:public at 10.0.0.1:::::2

 

SetEnv[foundry2]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet2"

 

MaxBytes[foundry2]: 12500000

 

Title[foundry2]: Traffic on Blue Coat 8000-3

 

PageTop[foundry2]: <H1>Traffic on Blue Coat 8000-3</H1>

 

 

 

Regards,

 

 

 

_________________________

 

Mir Hafeez Ali

 

 

 

 

 

 

 

--

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe

Archive     http://lists.ee.ethz.ch/mrtg

FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi




-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 7k (7975 bytes)
-- URL : http://lists.ee.ethz.ch/p/21-image001.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi