[mrtg] Re: Foundry MIB

[mrtglist at keithbergen.com]

Another thing you can do is to set ABSMAX to something high. According to
how I read the documentation, if you set Maxbytes to 100, the program will
throw out any values that exceed 100. To get around that, set ABSMAX to
something higher. The program will then use those higher values and not
throw them away. See the section on ABSMAX at
http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.html.

Regards,
Keith.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Muhammed Ali
Sent: Saturday, October 28, 2006 10:57 AM
To: 'Mir Hafeez Ali'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Foundry MIB


Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
You have configured Maxbytes to 100 Mb only, then anything above 100 mb will
be dropped  by MRTG. Increase the Maxbytes to your interface speed. 

 

Regards

Muhammed Ali

 



 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Mir Hafeez Ali
Sent: Saturday, October 28, 2006 5:41 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Foundry MIB

 

Hi everyone,

 

 

I am not able to read the traffic above 100MB from the Gig Interface on

Foundry JetCore Switch.  I allowed the configuration to use SNMP V 2 also.

 

 

 

Following is the configuration.  Please someone help if they know anything

about this.

 

 

 

### Interface 65 >> Descr: 'GigabitEthernet2/1' | Name: 'ethernet2/1' | Ip:

'212.107.116.242' | Eth: '00-0c-db-7f-f5-20' ###

 

 

 

Target[foundry2]: 65:public at 10.0.0.1:::::2

 

SetEnv[foundry2]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet2"

 

MaxBytes[foundry2]: 12500000

 

Title[foundry2]: Traffic on Blue Coat 8000-3

 

PageTop[foundry2]: <H1>Traffic on Blue Coat 8000-3</H1>

 

 

 

Regards,

 

 

 

_________________________

 

Mir Hafeez Ali

 

 

 

 

 

 

 

--

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe

Archive     http://lists.ee.ethz.ch/mrtg

FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi




-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 7k (7975 bytes)
-- URL : http://lists.ee.ethz.ch/p/21-image001.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi