[mrtg] Re: Cisco 2916 no values reporting

[Koelstra, J. (Jan)]

John,

The only difference  I see -beside a different maxbytes setting- is the target line which is split in 2 for the Fa0/1 interface. These two parts should be on 1 line.
To do some more troubleshooting you could have a look in the logfile which is created after starting mrtg with the '--logging=<some file name>' option

HTH,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of John M. Krumenacker
Sent: Friday, January 12, 2007 3:38 AM
To: MRTG Mailing List
Subject: [mrtg] Re: Cisco 2916 no values reporting


it's all private so this is the actual config:





### Interface 1 >> Descr: 'VLAN1' | Name: 'VL1' | Ip: '192.168.1.10' |
Eth: '00-90-b1-ae-78-80' ###

Target[192.168.1.10_VLAN1]: \VLAN1:public at 192.168.1.10:
SetEnv[192.168.1.10_VLAN1]: MRTG_INT_IP="192.168.1.10" MRTG_INT_DESCR="VLAN1"
MaxBytes[192.168.1.10_VLAN1]: 1250000
Title[192.168.1.10_VLAN1]: VLAN1
PageTop[192.168.1.10_VLAN1]: <h1>VLAN1</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>bplnoc2916 in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>VLAN1 VLAN1 </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>ethernetCsmacd (6)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>VL1</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>1250.0 kBytes/s</td>
				</tr>
				<tr>
					<td>Ip:</td>
					<td>192.168.1.10 ()</td>
				</tr>
			</table>
		</div>


### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-90-b1-ae-78-81' ###

Target[192.168.1.10_FastEthernet0_1]:
\FastEthernet0/1:public at 192.168.1.10:
SetEnv[192.168.1.10_FastEthernet0_1]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/1"
MaxBytes[192.168.1.10_FastEthernet0_1]: 12500000
Title[192.168.1.10_FastEthernet0_1]: FastEthernet0/1 -- bplnoc2916
PageTop[192.168.1.10_FastEthernet0_1]: <h1>FastEthernet0/1 -- bplnoc2916</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>bplnoc2916 in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>FastEthernet0/1 UpLink to CableModem RTR </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>ethernetCsmacd (6)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>Fa0/1</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>12.5 MBytes/s</td>
				</tr>
			</table>
		</div>


On Thu, 2007-01-11 at 20:29 -0600, MrPaul wrote:
> Can you post the MRTG config for one of your interfaces (changing the
> IP and snmp community in the target field would be wise). Paul
>
> On 1/11/07, John M. Krumenacker <krums at bplnoc.com> wrote:
>         Hello All,
>        
>         I have configured a 2916 in MRTG (ver 2.15.0).
>        
>         I see the interface traffic updating on vlan1 only - but all
>         the other
>         interfaces (all 16 are active) show exactly 35 b/s for the
>         last 6 hours
>         (since I configured it).
>        
>         On the 2916 I enabled RO SNMP and nothing else. Didn't feel i
>         needed to.
>         15 ports are all auto - one is set to port monitor fa0/1.
>         Nothing
>         special about this config.
>        
>         Can anyone enlighten me please?
>        
>         Thanks
>        
>         John
>        
>         --
>         Unsubscribe
>         mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>         Archive     http://lists.ee.ethz.ch/mrtg
>         FAQ         http://faq.mrtg.org    Homepage
>         http://www.mrtg.org
>         WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>        
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
_________________________________________________________

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The state accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi