[mrtg] Re: Cisco 2916 no values reporting

[John M. Krumenacker]

it's all private so this is the actual config:





### Interface 1 >> Descr: 'VLAN1' | Name: 'VL1' | Ip: '192.168.1.10' |
Eth: '00-90-b1-ae-78-80' ###

Target[192.168.1.10_VLAN1]: \VLAN1:public at 192.168.1.10:
SetEnv[192.168.1.10_VLAN1]: MRTG_INT_IP="192.168.1.10"
MRTG_INT_DESCR="VLAN1"
MaxBytes[192.168.1.10_VLAN1]: 1250000
Title[192.168.1.10_VLAN1]: VLAN1
PageTop[192.168.1.10_VLAN1]: <h1>VLAN1</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>bplnoc2916 in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>VLAN1 VLAN1 </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>ethernetCsmacd (6)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>VL1</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>1250.0 kBytes/s</td>
				</tr>
				<tr>
					<td>Ip:</td>
					<td>192.168.1.10 ()</td>
				</tr>
			</table>
		</div>


### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-90-b1-ae-78-81' ###

Target[192.168.1.10_FastEthernet0_1]:
\FastEthernet0/1:public at 192.168.1.10:
SetEnv[192.168.1.10_FastEthernet0_1]: MRTG_INT_IP=""
MRTG_INT_DESCR="FastEthernet0/1"
MaxBytes[192.168.1.10_FastEthernet0_1]: 12500000
Title[192.168.1.10_FastEthernet0_1]: FastEthernet0/1 -- bplnoc2916
PageTop[192.168.1.10_FastEthernet0_1]: <h1>FastEthernet0/1 --
bplnoc2916</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>bplnoc2916 in </td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td></td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>FastEthernet0/1 UpLink to CableModem RTR </td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>ethernetCsmacd (6)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>Fa0/1</td>
				</tr>
				<tr>
					<td>Max Speed:</td>
					<td>12.5 MBytes/s</td>
				</tr>
			</table>
		</div>


On Thu, 2007-01-11 at 20:29 -0600, MrPaul wrote:
> Can you post the MRTG config for one of your interfaces (changing the
> IP and snmp community in the target field would be wise).
> Paul
> 
> On 1/11/07, John M. Krumenacker <krums at bplnoc.com> wrote:
>         Hello All,
>         
>         I have configured a 2916 in MRTG (ver 2.15.0).
>         
>         I see the interface traffic updating on vlan1 only - but all
>         the other
>         interfaces (all 16 are active) show exactly 35 b/s for the
>         last 6 hours
>         (since I configured it). 
>         
>         On the 2916 I enabled RO SNMP and nothing else. Didn't feel i
>         needed to.
>         15 ports are all auto - one is set to port monitor fa0/1.
>         Nothing
>         special about this config.
>         
>         Can anyone enlighten me please? 
>         
>         Thanks
>         
>         John
>         
>         --
>         Unsubscribe
>         mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>         Archive     http://lists.ee.ethz.ch/mrtg
>         FAQ         http://faq.mrtg.org    Homepage
>         http://www.mrtg.org
>         WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
>         
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi