[mrtg] MRTG not refreshing values

[Bowman, John (SLC-MEW)]

Hello all, and a quick thanks for your help in advance.

 

I have MRTG 2.15.2 running on Windows Server 2003 with ActivePerl.
MRTG is running as a service and produces the first graph just fine.
The problem comes when it's time to refresh.  MRTG seems to not be
overwriting whatever file is necessary to redraw the graph with  current
results.   I have a total graph for a Cisco3650G router that adds all
traffic from the ports into one graph and then I have individual graphs
for each port.  Each graph spikes up and then never goes down again.  I
know this to be an error because I have physically unplugged all ports
and the graphs still show over 770MB/min usage.  

 

If I delete the .png files and restart MRTG, I get the same graphs as
before.  After deleting the log files and the .old files and restarting
MRTG, the graphs start at 0 but quickly go to 770MB/min and stay there.
There are no messages in the event log from MRTG.

 

I'm really at a loss here.  My config file has 28 interfaces (24 + 4
upload ports) for each of 5 routers, and then the addition of all in and
out traffic for the first 24 ports combined on one graph.   I've taken
the combined port graph out of the .cfg file and have the same results
on random ports (no one port is doing this constantly).  

 

 I used cfgCreator to create the .cfg file.  

 

 

Here is a sample of my .cfg file.  I've included one section for an
individual port and one for the total traffic.   Any help would be
greatly appreciated.

 

 

######################################################

# Utilisation report for xxxxxxxxxxx, interface 10101

######################################################

 

# Interface No.   : 4

# Interface Index : 10101

 

Target[xxx.xxx.xxx.xxx_10101_IntUtil]:
ifInOctets.10101&ifOutOctets.10101:anyname at xxx.xxx.xxx.xxx:

Options[xxx.xxx.xxx.xxx _10101_IntUtil]: perminute, gauge, nobanner,
nolegend

#WithPeak[xxx.xxx.xxx.xxx _10101_IntUtil]: 

UnScaled[xxx.xxx.xxx.xxx _10101_IntUtil]: dwmy

#Suppress[xxx.xxx.xxx.xxx _10101_IntUtil]: 

MaxBytes[xxx.xxx.xxx.xxx _10101_IntUtil]: 100000000

LegendI[xxx.xxx.xxx.xxx _10101_IntUtil]: In

LegendO[xxx.xxx.xxx.xxx _10101_IntUtil]: Out

Title[xxx.xxx.xxx.xxx _10101_IntUtil]: Utilisation report for
xxxxxxxxxxxxxxxx, interface 10101

Colours[xxx.xxx.xxx.xxx_10101_IntUtil]:
BLUE#C00000,GREEN#00C000,RED#0000FF,MAGENTA#FF00FF

Background[xxx.xxx.xxx.xxx_10101_IntUtil]: #FFFFFF

PageTop[xxx.xxx.xxx.xxx_10101_IntUtil]: <font face='Arial'
size=3><B>Traffic Analysis for xxxxxxxxxxxxxxxxxx</b>

 <br><font face='Arial' size=2>Link Description  : GigabitEthernet0/1

 <br><font face='Arial' size=2>Device            : xxx.xxx.xxx.xxx,
Interface : 10101

 <br><font face='Arial' size=2>Speed             : 100000000

 <br><font face='Arial' size=2>System Location   : 

 <br><font face='Arial' size=2>System Description: Cisco IOS Software,
C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEB2, RELEASE SOFTWARE
(fc1)  Copyright (c) 1986-2005 by Cisco Systems, Inc.  Compiled Tue
07-Jun-05 23:34 by yenanh

 </p>

 

 

######################################################

# Total Router Traffic XXXXXXXXXXXX

######################################################

 

Target[totalgraph1]:
ifInOctets.10101&ifOutOctets.10101:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10102&ifOutOctets.10102:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10103&ifOutOctets.10103:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10104&ifOutOctets.10104:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10105&ifOutOctets.10105:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10106&ifOutOctets.10106:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10107&ifOutOctets.10107:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10108&ifOutOctets.10108:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10109&ifOutOctets.10109:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10110&ifOutOctets.10110:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10111&ifOutOctets.10111:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10112&ifOutOctets.10112:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10113&ifOutOctets.10113:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10114&ifOutOctets.10114:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10115&ifOutOctets.10115:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10116&ifOutOctets.10116:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10117&ifOutOctets.10117:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10118&ifOutOctets.10118:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10119&ifOutOctets.10119:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10120&ifOutOctets.10120:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10121&ifOutOctets.10121:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10122&ifOutOctets.10122:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10123&ifOutOctets.10123:anyname at xxx.xxx.xxx.xxx +
ifInOctets.10124&ifOutOctets.10124:anyname at xxx.xxx.xxx.xxx

Options[totalgraph1]: perminute, gauge, nobanner, nolegend

MaxBytes[totalgraph1]: 100000000000

LegendI[totalgraph1]: In

LegendO[totalgraph1]: Out

Title[totalgraph1]: Test Total Traffic 5

Colours[totalgraph1]: BLUE#C00000,GREEN#00C000,RED#0000FF,MAGENTA#FF00FF

Background[totalgraph1]: #FFFFFF

PageTop[totalgraph1]: <font face='Arial' size=3><B>Total Traffic for
Switch xxxxxxxxxxxx</b>

 <br><font face='Arial' size=2>Device            : xxxxxxxxxxxx

 <br><font face='Arial' size=2>System Location   : Level

 <br><font face='Arial' size=2>System Description: Cisco Catalyst 3560G

 </p> 
  
  
This message contains information which may be confidential and privileged.  Unless you are the intended recipient (or authorized to receive this message for the intended recipient), you may not use, copy, disseminate or disclose to anyone the message or any information contained in the message.  If you have received the message in error, please advise the sender by reply e-mail, and delete the message.  Thank you very much. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20070621/351673e2/attachment-0001.html