[mrtg] F5 LTM and GTM cpu graph

[Blaise Vigilante]

Has anyone been successful in using mrtg to generate graphs for F5's LTM
or GTM?
I ran the configmaker program and it picked up the 3 interfaces so I
thought that I was 
on the right track.  Unfortunately, I have 3 graphs with no data.
 
Thanks;
 
Blaise Vigilante
bvigilante at ask.com
 
 

________________________________

From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Blaise Vigilante
Sent: Thursday, November 15, 2007 2:13 PM
To: Volk,Gregory B; mrtg at lists.oetiker.ch
Subject: Re: [mrtg] F5 LTM and GTM cpu graph


       * sysHostCpuUser (.1.3.6.1.4.1.3375.2.1.7.2.2.1.3)
          * sysHostCpuNice (.1.3.6.1.4.1.3375.2.1.7.2.2.1.4)
          * sysHostCpuSystem (.1.3.6.1.4.1.3375.2.1.7.2.2.1.5)
          * sysHostCpuUser (.1.3.6.1.4.1.3375.2.1.7.2.2.1.3)
          * sysHostCpuNice (.1.3.6.1.4.1.3375.2.1.7.2.2.1.4)
          * sysHostCpuIdle (.1.3.6.1.4.1.3375.2.1.7.2.2.1.5)
          * sysHostCpuSystem (.1.3.6.1.4.1.3375.2.1.7.2.2.1.6)
          * sysHostCpuIrq (.1.3.6.1.4.1.3375.2.1.7.2.2.1.7)
          * sysHostCpuSoftirq (.1.3.6.1.4.1.3375.2.1.7.2.2.1.8)
          * sysHostCpuIowait (.1.3.6.1.4.1.3375.2.1.7.2.2.1.9)

 
Thanks;
 
Blaise Vigilante
 

________________________________

From: Volk,Gregory B [mailto:greg.volk at edwardjones.com] 
Sent: Thursday, November 15, 2007 1:43 PM
To: Blaise Vigilante; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] F5 LTM and GTM cpu graph


I sat down a few months ago with the GTM mibs. There are quite a few
interesting variables in there, but most of the time when I attempted to
snmpwalk/get against the OIDs nothing came back, like the variable
wasn't supported or enabled. The SNMP access configuration on the system
itself looks very simple, and I think I have all the OID trees enabled,
but it's looking like alot of these OIDs just aren't implemented.
 
I have not opened a ticket with F5 on this yet (it's been on my list of
things to do).
 
Just out of curiosity, what OIDs did they give you? I would like to try
to poll them.
 
 
 
 
 If you are not the intended recipient of this message (including
attachments), or if you have received this message in error, immediately
notify us and delete it and any attachments.  If you no longer wish to
receive e-mail from Edward Jones, please send this request to
messages at edwardjones.com.  You must include the e-mail address that you
wish not to receive e-mail communications.  For important additional
information related to this e-mail, visit
www.edwardjones.com/US_email_disclosure
<http://www.edwardjones.com/US_email_disclosure> 
 
________________________________

 
From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Blaise Vigilante
Sent: Thursday, November 15, 2007 12:04 PM
To: mrtg at lists.oetiker.ch
Subject: [mrtg] F5 LTM and GTM cpu graph


Hello,
 
I need some help to create a cpu graph for my f5 LTM and GTM boxes.
I was sent a listing of 10 OIDs from their tech support and told that I
have to 
perform 2 seperate polls for each and then take the delta values.
Either I asked the wrong question or they make it very difficult to find
out the 
CPU utilization.
 
Has anyone been successful in creating a cpu graph for the GTM and LTM?
 
 
Thanks;
 
Blaise Vigilante
bvigilante at ask.com
914-826-2135
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20071119/c1b74d44/attachment.html