[mrtg] MRTG Brocade switch monitoring error

anjini shukla anjinishukla at gmail.com
Wed Aug 27 23:27:52 CEST 2008


Hello all,
This works.....thanks a lot, i checked every thing but missed on the most
evident one.

@Michele: I inserted the Ip address of the swicth which was missing in my
.cfg file. Thanks a lot for your time and help...

:)
:)

--Anjini

On Wed, Aug 27, 2008 at 10:59 AM, Anson Rinesmith <
arinesmith at bigrivertelephone.com> wrote:

>  So replace the name fcswitch with the ip address or put fcswitch in your
> hosts file with the IP you want to use. The answer to you problem is right
> in the error message.
>
>
>
> Skipping host fcswitch as it does not resolve to an IPv4 address
>
>
>
>
>  ------------------------------
>
> *From:* mrtg-bounces at lists.oetiker.ch [mailto:
> mrtg-bounces at lists.oetiker.ch] *On Behalf Of *anjini shukla
> *Sent:* Wednesday, August 27, 2008 12:53 PM
> *To:* anjini shukla
> *Cc:* mrtg at lists.oetiker.ch
> *Subject:* Re: [mrtg] MRTG Brocade switch monitoring error
>
>
>
> I can ping this host, and reply is IP.xx.xx.xx is alive. I can also do an
> snmpwalk with this ip address.:(
>
>
> Thanks,
> Anjini
>
> On Wed, Aug 27, 2008 at 5:02 AM, Matthew Petach <mpetach at yahoo.com> wrote:
>
>
> The crucial line is
>
> WARNING: Skipping host fcswitch as it does not resolve to an IPv4 address
>
> Make sure that the name you put in your config file is the right
> name for the device; if you can't ping it by that name, MRTG can't
> do anything as far as monitoring it.
>
> Matt
>
>
>
> ----- Original Message ----
> From: anjini shukla <anjinishukla at gmail.com>
> To: mrtg at lists.oetiker.ch
> Sent: Tuesday, August 26, 2008 4:56:12 PM
> Subject: [mrtg] MRTG Brocade switch monitoring error
>
> Hello,
> I am trying to plot graphs for my Brocade 4100 SAN switch and am using
> Solaris 10, I am following the documentation given:
> http://www.xolution.ch/mrtg/   i have written my config file:
>
> ~ snip
> Target[switch.IP_0]:
> 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12.1&1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.1:public at fcswitch
> Title[switch.IP_0]: fc throughput on switch fcswitch port 0 (mysun jnic0
> slot7)
> PageTop[switch.IP_0]: <H1>fc throughput on switch fcswswitch port 0 (mysun
> jnic0 slot7)</H1>
>
> ~snip
>
> the error message i am getting is:
>
> 2008-08-26 12:03:22: WARNING: Skipping host fcswitch as it does not resolve
> to an IPv4 address
> 2008-08-26 12:03:22: WARNING: no data for
> 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12&1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11:public at fcswitch.
> Skipping further queries for Host fcswitch in this round.
> 2008-08-26 12:03:22: ERROR: Target[xxx.xxx.xxx.xx_0][_IN_] ' $target->[0]{$mode}
> ' did not eval into defined data
>
> 2008-08-26 12:03:22: ERROR: Target[xxx.xxx.xxx.xx_0][_OUT_] ' $target->[0]{$mode}
> ' did not eval into defined data
>
>
>
> can any one give me any insight on this, ??
> Thanks
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20080827/a463203d/attachment.html 


More information about the mrtg mailing list