[mrtg] DOM Issue - Windows MRTG

[nangineni praneeth]

then i think the max bytes value which you specified in your config file is lower than the value MRTG is receiving....try increasing the value you specified in the max bytes field

Best regards  Venkat



--- On Wed, 4/22/09, Kashif Siddiq Patoli <patoli at gmail.com> wrote:

> From: Kashif Siddiq Patoli <patoli at gmail.com>
> Subject: Re: [mrtg] DOM Issue - Windows MRTG
> To: nv_2030 at yahoo.com
> Date: Wednesday, April 22, 2009, 12:04 PM
> Hi Venkat,
> 
> I am getting follwoing log file entries:
> 
> 1240381929 2538 2538
> 1240381929 0 0 0 0
> 1240381618 0 0 0 0
> 1240381500 0 0 0 0
> 1240381200 0 0 0 0
> 1240380900 0 0 0 0
> 1240380600 0 0 0 0
> 
> output truncated due to similiar pattern
> 
> Kashif
> 
> On Wed, Apr 22, 2009 at 11:47 AM, nangineni praneeth
> <nv_2030 at yahoo.com>wrote:
> 
> >
> > what does your log file show...if it shows -1, -1 then
> it means your
> > polling has failed and the OID might be wrong....on
> the other hand if you
> > get something like 0,0 then there can be several
> reasons
> >
> > 1) you need to wait for MRTG to update the graphs(for
> atleast three
> > successive polls)
> >
> > 2)  the value which you are receiving through MRTG
> poll is higher than the
> > one you specified in your max bytes in your config
> file......if thats the
> > case MRTG would ignore any value higher than the one
> specified in Max
> > bytes...
> >
> > Best regards  Venkat
> >
> >
> >
> > --- On Wed, 4/22/09, Kashif Siddiq Patoli
> <patoli at gmail.com> wrote:
> >
> > > From: Kashif Siddiq Patoli
> <patoli at gmail.com>
> > > Subject: [mrtg] DOM Issue - Windows MRTG
> > > To: mrtg at lists.oetiker.ch
> > > Date: Wednesday, April 22, 2009, 10:48 AM
> >  > Hi,
> > >
> > > I am using following cfg script to monitor the Tx
> optical
> > > power but I am
> > > getting the blank MRTG graph (graph attached):
> > >
> > > Target[optical_power]:
> > >
> >
> 1.3.6.1.4.1.9.9.91.1.1.1.1.4.34&1.3.6.1.4.1.9.9.91.1.1.1.1.4.34:public at a.b.c.d
> > > YLegend[optical_power]: dB
> > > Options[optical_power]: gauge, noi, nopercent
> > > factor[optical_power]: -1
> > > MaxBytes[optical_power]: 20
> > > ShortLegend[optical_power]: dB
> > > Legend1[optical_power]: dB
> > > Title[optical_power]: Optical Power Measurement
> for STM-64
> > > PageTop[optical_power]: <H1>Optical Power
> Measurement
> > > for STM-64 </H1>
> > >
> > > Plz let me know any potential errors.
> > >
> > >
> > > Kashif
> > > _______________________________________________
> > > mrtg mailing list
> > > mrtg at lists.oetiker.ch
> > > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
> >
> >
> >
> >
> 
> 
> -- 
> Kashif Siddiq Patoli