[mrtg] Can't create cfg file on Cisco Pix 515
Kevin Wong
KWong at PaceWildenstein.com
Fri Apr 24 22:17:43 CEST 2009
Yes. The cfg file does have the correct community name "pace". See below... Am I missing something?
### Interface 1 >> Descr: 'Firewall-'outside'-interface' | Name: '' | Ip: 'xxx.xxx.xxx.xxx' | Eth: '00-0d-bd-a1-84-49' ###
Target[192.168.1.2_1]: 1:pace at 192.168.1.2:
SetEnv[192.168.1.2_1]: MRTG_INT_IP="xxx.xxx.xxx.xxx" MRTG_INT_DESCR="PIX-Firewall-'outside'-interface"
MaxBytes[192.168.1.2_1]: 12500000
Title[192.168.1.2_1]: Traffic Analysis for 1 -- Firewall
PageTop[192.168.1.2_1]: <h1>Traffic Analysis for 1 -- Firewall</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>Firewall in </td>
</tr>
<tr>
<td>Maintainer:</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>PIX-Firewall-'outside'-interface </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td></td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>xxx.xxx.xxx.xxx (rrcs-24-xxx-230-27.nyc.biz.rr.com)</td>
</tr>
</table>
</div>
-----Original Message-----
From: Peter P. Benac [mailto:ppbenac at emacolet.com]
Sent: Friday, April 24, 2009 4:06 PM
To: Kevin Wong; mrtg at lists.oetiker.ch
Subject: RE: [mrtg] Can't create cfg file on Cisco Pix 515
You changed it in the pix, but did you tell MRTG to use the correct string
----
To have principles...
First have courage.. With principles comes integrity!!!
-----Original Message-----
From: mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch]
On Behalf Of Kevin Wong
Sent: Friday, April 24, 2009 15:58
To: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Can't create cfg file on Cisco Pix 515
Thanks for the advise. And yes, I have to enable polling on the pix.
It worked. However, I get this error when I run it. Why is it "public"
being used as the community name even I change it?
Error:
can't resolve "mrtg.cfg" to IP address at C:/mrtg-2.16.2/bin\..\lib\mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public at mrtg.cfg::::::v4only at cfgmaker line 950
WARNING: Skipping public at mrtg.cfg: as no info could be retrieved
-----Original Message-----
From: mrtg-bounces at lists.oetiker.ch
[mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of McDonald, Dan
Sent: Friday, April 24, 2009 2:01 PM
To: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Can't create cfg file on Cisco Pix 515
On Fri, 2009-04-24 at 13:22 -0400, Kevin Wong wrote:
> Hi,
> I am experiencing an issue trying to create the cfg file. See below
> error below. Can someone point me in the right direction to get this
> resolved?
snmp has to be explicitly enabled per polling device on the pix.
The syntax changed between version 6.2 and 6.3 and 7.0 (yes, 3 different, incompatible sets of syntax) so allowing "polling" from a particular host is left as an exercise for the reader...
--
Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com
_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
More information about the mrtg
mailing list