[mrtg] riverstone

[Mersberger, Robert]

Have you tried removing the snmp access list?


-----Original Message-----
From: mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Nicolás Quesada
Sent: Wednesday, August 26, 2009 2:19 PM
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] riverstone

Hello everyone,

first, thanks a lot your help. It still doesn't work... so i'm going to write down all I realize about my problem right now:

1. MRTG works perfectly with my Cisco routers: GetIf and MRTG work both OK:
    I obtain SNMP response with MRTG, GetIf and SNMPWALK.exe on windows.

2. Riverstone doesn't work with GetIf and MRTG either.

 2.1. I cannot generate the .mrtg file with CFGMAKER.
 2.2. I don't obtain SNMP response from the RStone with GetIf.
 2.3. I do'nt obtain SNMP response from SNMPWALK.exe that I execute by windows.

I acced to my RStone by an internal provider network, so any Firewall is filtering me. Moreover, I can access by SNMP to the Cisco routers by the same network.

So, probably my problem is located in RStone configuration??

That's my RStone configuration:

  acl SNMP permit ip myIP/32 any
  acl SNMP apply service snmp logging deny-only

  snmp set community public privilege read
  snmp set community private privilege read-write
  snmp set trap-source IP
  snmp set source-ip WAN.IP

  snmp set mib name ctron-ssr-config-mib status enable
  snmp set target targetIP community public status enable
  snmp enable trap authentication

I can see the ACL SNMP counter growing:

  ACL "SNMP":
  Forward    Count    Source IP/Mask
  Permit      18         myIP/32

And I can see the SNMP 5 last access:

  SNMP Last 5 Clients:
  OtherDepartmentIP      2009-08-26 20:53:16
  myIP                          2009-08-26 20:53:28
  myIP                          2009-08-26 20:53:28
  myIP                          2009-08-26 20:53:29
  OtherDepartmentIP      2009-08-26 20:53:16

The OtherDepartmentIP is a machine that is receiving correctly (theorically, the responsable is on holidays) SNMP responses.

So...... that's my case.... and the case is that I don't know what to do now... Am I forgotting anything??

Thanks a lot, another time!!

Nico

_______________________________________________
mrtg mailing list
mrtg at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg

Please consider the environment before printing this e-mail.

CONFIDENTIAL NOTICE:
This e-mail message and any attachment(s)  (collectively,
 this 'Email') are intended only for the confidential use of
the recipient(s) named above. If the reader of this message
is not the intended recipient named obove or an agent
responsible for delivering it to the intended recipient
named above, you have received this Email in error.
Please notify the sender immediately and permanently delete
this Email and any copies thereof.