[mrtg] CPU and RAM Utiliziation for Windows Machine

[Lyle Giese]

It's also possible that Windows firewall was 'helpful' and is blocking
snmp traffic.

Lyle

Steve Shipway wrote:
> It sounds as if the SNMP is no longer working.
> Check that your SNMP service is running and has the correct community
> and so on - can you use snmpwalk from the MRTG server?  If not then
> its an SNMP config issue on your windows box.  If you can, you need to
> SNMPwalk the 1.3.6.1.2.1.25.2.3.1  tree and check that the values are
> still there.
>  
> Steve
>  
> ------------------------------------------------------------------------
> *From:* mrtg-bounces at lists.oetiker.ch [mrtg-bounces at lists.oetiker.ch]
> On Behalf Of Matt Baer [matt at baerconsult.com]
> *Sent:* Friday, 23 October 2009 8:38 p.m.
> *To:* mrtg
> *Subject:* Re: [mrtg] CPU and RAM Utiliziation for Windows Machine
>
> This is happening again (I assume as a result of Windows Updates) and
> all my graphs are staying at the last successful SNMP poll.  What
> should I post up?
> ...
> 2009-09-25 22:00:23: ERROR: Target[desktoppc.mem][_IN_] '
> $target->[50]{$mode}  * 65536' (warn): Use of uninitialized value in
> multiplication (*) at (eval 96) line 1.
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20091024/78ab67fa/attachment.htm