[mrtg] error in temperature oid

[Steve Shipway]

Try adding .0 to the end of the OIDs, this may be the problem.  Also, the error message says this OID does not exist - maybe the reason is that your device simply does not support temperature readings?

Steve
________________________________
From: mrtg-bounces at lists.oetiker.ch [mrtg-bounces at lists.oetiker.ch] On Behalf Of NAP [nap at etecsa.cu]
Sent: Wednesday, 9 September 2009 7:40 a.m.
To: mrtg at lists.oetiker.ch
Subject: [mrtg] error in temperature oid

### I can’t to read temperature in my cisco 6509,
        Could you tell me what happen ???.

Regards,
Miguel


Target[nap1.temp]: 1.3.6.1.4.1.9.9.13.1.3.1.3.1&1.3.6.1.4.1.9.9.13.1.3.1.3.3:napgate at i.p.my.route
Directory[nap1.temp]: temperatura
YLegend[nap1.temp]: Degrees C
ShortLegend[nap1.temp]: °C
MaxBytes[nap1.temp]: 60
PageTop[nap1.temp]: <H1> Temperatura - Crb-3 </H1>
Options[nap1.temp]: nopercent, growright, gauge
AbsMax[nap1.temp]: 60
Title[nap1.temp]: Temperatura Router Crb-3
Legend1[nap1.temp]: Promedio 1 minuto temperatura admisi<F3>n (Inlet)
Legend2[nap1.temp]: Promedio 1 minuto temperatura de extracci<F3>n (Outlet)
LegendI[nap1.temp]: &nbsp;Inlet:
LegendO[nap1.temp]: &nbsp;Outlet:

---------------------------------------------------------------------------------------------------------------------
### log

2009-09-08 15:24:00 -- Started mrtg
2009-09-08 15:24:00 -- SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1)
SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161)
                  community: "napgate"
                 request ID: -498128576
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486
2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.3 sysUptime sysName on napgate at i.p.my.route::::::v4only
 at /usr/local/bin/mrtg line 1798
2009-09-08 15:24:00 -- SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1)
SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161)
                  community: "napgate"
                 request ID: -498128575
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486
2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.2 sysUptime sysName on napgate at i.p.my.route::::::v4only
 at /usr/local/bin/mrtg line 1798
2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, inlast is not defined
2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, outlast is not defined
2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_IN_] ' $target->[1]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_OUT_] ' $target->[1]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, inlast is not defined
2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, outlast is not defined




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20090909/88011102/attachment-0001.htm