[mrtg] error in temperature oid

[Mersberger, Robert]

OID looks correct.  Is this a Cisco Device?   can you do an snmpget from the command line?  Does it return a proper value?

If Cisco Device what is it?


________________________________
From: mrtg-bounces at lists.oetiker.ch [mailto:mrtg-bounces at lists.oetiker.ch] On Behalf Of Steve Shipway
Sent: Tuesday, September 08, 2009 4:10 PM
To: NAP; mrtg at lists.oetiker.ch
Subject: Re: [mrtg] error in temperature oid

Try adding .0 to the end of the OIDs, this may be the problem.  Also, the error message says this OID does not exist - maybe the reason is that your device simply does not support temperature readings?

Steve
________________________________
From: mrtg-bounces at lists.oetiker.ch [mrtg-bounces at lists.oetiker.ch] On Behalf Of NAP [nap at etecsa.cu]
Sent: Wednesday, 9 September 2009 7:40 a.m.
To: mrtg at lists.oetiker.ch
Subject: [mrtg] error in temperature oid

### I can't to read temperature in my cisco 6509,
        Could you tell me what happen ???.

Regards,
Miguel


Target[nap1.temp]: 1.3.6.1.4.1.9.9.13.1.3.1.3.1&1.3.6.1.4.1.9.9.13.1.3.1.3.3:napgate at i.p.my.route
Directory[nap1.temp]: temperatura
YLegend[nap1.temp]: Degrees C
ShortLegend[nap1.temp]: °C
MaxBytes[nap1.temp]: 60
PageTop[nap1.temp]: <H1> Temperatura - Crb-3 </H1>
Options[nap1.temp]: nopercent, growright, gauge
AbsMax[nap1.temp]: 60
Title[nap1.temp]: Temperatura Router Crb-3
Legend1[nap1.temp]: Promedio 1 minuto temperatura admisi<F3>n (Inlet)
Legend2[nap1.temp]: Promedio 1 minuto temperatura de extracci<F3>n (Outlet)
LegendI[nap1.temp]: &nbsp;Inlet:
LegendO[nap1.temp]: &nbsp;Outlet:

---------------------------------------------------------------------------------------------------------------------
### log

2009-09-08 15:24:00 -- Started mrtg
2009-09-08 15:24:00 -- SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1)
SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161)
                  community: "napgate"
                 request ID: -498128576
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486
2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.3 sysUptime sysName on napgate at i.p.my.route::::::v4only
 at /usr/local/bin/mrtg line 1798
2009-09-08 15:24:00 -- SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1)
SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161)
                  community: "napgate"
                 request ID: -498128575
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486
2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.2 sysUptime sysName on napgate at i.p.my.route::::::v4only
 at /usr/local/bin/mrtg line 1798
2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, inlast is not defined
2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, outlast is not defined
2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_IN_] ' $target->[1]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_OUT_] ' $target->[1]{$mode} ' did not eval into defined data
2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, inlast is not defined
2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, outlast is not defined





________________________________
Please consider the environment before printing this e-mail.

CONFIDENTIAL NOTICE:
This e-mail message and any attachment(s) (collectively,
this 'Email') are intended only for the confidential use of
the recipient(s) named above. If the reader of this message
is not the intended recipient named above or an agent
responsible for delivering it to the intended recipient
named above, you have received this Email in error.
Please notify the sender immediately and permanently delete
this Email and any copies thereof.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/mrtg/attachments/20090908/bf07431d/attachment.htm