[mrtg] Using MRTG ping-probe with MRTG

[Steve Shipway]

An example of how to use mrtg-ping-probe.  This makes use of the Routers2
extensions, if you have Routers2.

 

Target[junos-prod.its-ping]: `/u01/mrtg/bin/mrtg-ping-probe -p
'1000*max/1000*min' -s 10.21.5.212` / 1000000

Title[junos-prod.its-ping]: Ping times to junos-prod.its.auckland.ac.nz

MaxBytes[junos-prod.its-ping]: 5

AbsMax[junos-prod.its-ping]: 10

PageTop[junos-prod.its-ping]: null

Options[junos-prod.its-ping]: gauge nopercent

YLegend[junos-prod.its-ping]: RTT Seconds

ShortLegend[junos-prod.its-ping]: s

Legend1[junos-prod.its-ping]: Round Trip Time range

Legend2[junos-prod.its-ping]: Round Trip Time range

Legend3[junos-prod.its-ping]: High Peak 5min RTT

Legend4[junos-prod.its-ping]: Low Peak 5min RTT

LegendI[junos-prod.its-ping]: High:

LegendO[junos-prod.its-ping]: Low:

routers.cgi*ShortName[junos-prod.its-ping]: Ping: RTT

routers.cgi*Options[junos-prod.its-ping]: nomax nototal scaled nopercent

routers.cgi*GraphStyle[junos-prod.its-ping]: range

routers.cgi*InCompact[junos-prod.its-ping]: no

routers.cgi*UnScaled[junos-prod.its-ping]: none

routers.cgi*BgColour[junos-prod.its-ping]: #ffffff

routers.cgi*Icon[junos-prod.its-ping]: clock-sm.gif

routers.cgi*UpperLimit[junos-prod.its-ping]: 0.01

 

Change this to fit your own requirements.   Note the
routers.cgi*UpperLimit[] directive is to ensure proper scaling when RTT are
very low.  The calculations in the Target[] are to ensure that the values
are in SI units (seconds) to three decimal places.

 

Steve

 

Steve Shipway

 <mailto:s.shipway at auckland.ac.nz> s.shipway at auckland.ac.nz

(GNU Terry Pratchett)

 

From: mrtg [mailto:mrtg-bounces+s.shipway=auckland.ac.nz at lists.oetiker.ch]
On Behalf Of Rick Silacci
Sent: Thursday, 9 April 2015 7:30 a.m.
To: mrtg at lists.oetiker.ch
Subject: [mrtg] Using MRTG ping-probe with MRTG

 

Hello,

I'm trying to use MRTG Ping-Probe with MRTG.  I have no idea how to get
started.  I already have MRTG monitoring network traffic for 2000 devices.
Just don't know how to incorporate Ping-Probe.  I've read the documentation
and still can't figure it out.  Any help would be appreciated.

 

Thanks

 

 

Rick Silacci

Velociter Wireless

1525 Second Street

Escalon, CA 95320

Office: 209.838.1221

Phone: 209.838.1800

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oetiker.ch/pipermail/mrtg/attachments/20150408/b16451c0/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 10311 bytes
Desc: not available
URL: <http://lists.oetiker.ch/pipermail/mrtg/attachments/20150408/b16451c0/attachment-0001.bin>