[rrd-users] Re: Graphing more than 114 Mbps with RRDTool

[Paul Fischer]

I just tried this with straight MRTG 2.5.4c. It works fine! I am graphing
more than 114 Mbps by using my new OID pair. Now I need to try to see how
well it works when I integrate the MIB into MRTG and use the canonical
name.


> > From: pfischer at pfischer.isc.cw.net
> > Lessons Learned
> > ===============
> > If you want to graph more than 114 Mbps you need to find a vendor specific
> > MIB that will give you a 64-bit variable. You will likely need a
> > MIB Walker
> > to figure out which OIDs you want. I used HP Openview.

-- 
Paul Fischer - Sr. Network Eng. - Cable and Wireless Web Hosting
Author "Configuring Cisco Routers for ISDN" - Publisher McGraw-Hill
http://paul.tibex.com - paul.fischer at cwusa.com - (703) 292-2123 (v)
(703) 609-802.3 (cell) - (703) 292-2461 (fax) - Danger Will Robinson!!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: paul.fischer.vcf
Type: text/x-vcard
Size: 283 bytes
Desc: Card for Paul Fischer
Url : https://lists.oetiker.ch/pipermail/rrd-users/attachments/19991025/c5e9c55f/attachment.vcf