[rrd-users] Re: Configure Error

[Nishanth N Bhandary]

Hey, You got it right and everything went fine...

I did comment the line mentioned by you and swoosh...

Could Tobi throw some light on this kinda behaviour...

Thanks again,
Nishanth

----------------------------------------------
Nishanth N Bhandary
Trigent Software Limited
#49, Khanija Bhavan, First Floor
Race Course Road, Bangalore - 560 001
Tel : +91 80 2268790
Fax : +91 80 2268791
http://www.trigent.com


-----Original Message-----
From: Blower, Phil [mailto:Phil.Blower at encana.com]
Sent: Tuesday, October 29, 2002 7:52 PM
To: Nishanth Bhandary; 'Serge Maandag'; rrd-users at list.ee.ethz.ch
Subject: RE: [rrd-users] Re: Configure Error

I had the same problem on a sparc.  What I did was I searched the configure
file for the error and then commented out the line that says to abort.  Then
when I re-ran it, it worked just fine.  The line I commented out was on line
951 and looked like this:

 PROBLEMCC=`$PERL -e 'use Config; exit 0 if -x $Config{cc}; map {if (-x
"$_/$Config{cc}"){exit 0}} split /:/, $ENV{PATH};print $Config{cc}'`

Phil.

-----Original Message-----
From: Nishanth N Bhandary [mailto:nishanth_nb at trigent.com]
Sent: Tuesday, October 29, 2002 6:54 AM
To: 'Serge Maandag'; rrd-users at list.ee.ethz.ch
Subject: [rrd-users] Re: Configure Error


No Luck Serge....
The same error
checking for the C compiler perl wants to use to build its modules...
configure:
 test: unknown operator -B/usr/ccs/bin/

Is it because of absence of space between -B and the path.....? It's just my
guess...

Nishanth


----------------------------------------------
Nishanth N Bhandary
Trigent Software Limited
#49, Khanija Bhavan, First Floor
Race Course Road, Bangalore - 560 001
Tel : +91 80 2268790
Fax : +91 80 2268791
http://www.trigent.com


-----Original Message-----
From: Serge Maandag [mailto:serge.maandag at staff.zeelandnet.nl]
Sent: Tuesday, October 29, 2002 7:14 PM
To: Nishanth Bhandary; rrd-users at list.ee.ethz.ch
Subject: [rrd-users] Re: Configure Error


Not really. It presume it gets it through the "./configure" script. you
could try to rename cc to old_cc and make a symlink to gcc named cc.

Serge.

-----Original Message-----
From: Nishanth N Bhandary [mailto:nishanth_nb at trigent.com]
Sent: Tuesday, October 29, 2002 2:00 PM
To: Serge Maandag; rrd-users at list.ee.ethz.ch
Subject: RE: [rrd-users] Configure Error


Hello Serge,

Well, I'm using gcc 3.2 and I have no clue from where it is picking the path
/usr/ccs/bin... Any clue..?

Nishanth

----------------------------------------------
Nishanth N Bhandary
Trigent Software Limited
#49, Khanija Bhavan, First Floor
Race Course Road, Bangalore - 560 001
Tel : +91 80 2268790
Fax : +91 80 2268791
http://www.trigent.com


-----Original Message-----
From: Serge Maandag [mailto:serge.maandag at staff.zeelandnet.nl]
Sent: Tuesday, October 29, 2002 6:11 PM
To: Nishanth Bhandary; rrd-users at list.ee.ethz.ch
Subject: RE: [rrd-users] Configure Error

My guess: You're not using gcc, but SUNs cc, which probably won't work.
Either install gcc or look up cc's equivalent for the -B switch and repeat
that for all the other switches it doesn't understand.

Serge.

-----Original Message-----
From: Nishanth N Bhandary [mailto:nishanth_nb at trigent.com]
Sent: Tuesday, October 29, 2002 11:18 AM
To: rrd-users at list.ee.ethz.ch
Subject: [rrd-users] Configure Error


Hello,

I get this error whicle running sh configure during the rrdtool installation
on Solaris ver 2.8 on Intel

# sh configure
loading cache ./config.cache
checking host system type... i386-pc-solaris2.8
checking target system type... i386-pc-solaris2.8
checking build system type... i386-pc-solaris2.8
checking for a BSD compatible install... config/install-sh -c checking
whether build environment is sane... yes checking whether make sets
${MAKE}... yes checking for working aclocal... found checking for working
autoconf... found checking for working automake... found checking for
working autoheader... found checking for working makeinfo... found checking
for perl... /usr/local/bin/perl checking for shared library extension... so
checking for the C compiler perl wants to use to build its modules...
configure: test: unknown operator -B/usr/ccs/bin/

Please Help,
Nishanth

----------------------------------------------
Nishanth N Bhandary
Trigent Software Limited
#49, Khanija Bhavan, First Floor
Race Course Road, Bangalore - 560 001
Tel : +91 80 2268790 X 140
Fax: +91 80 2268791
http://www.trigent.com




--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 3k (3112 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/3DBE92E817515-winmail.d


--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi