[rrd-users] Re: Ecartis command results: appsub rrd-users fisayo at steineng.com 3E8C9B93:2B16.1:eeqhfref

[Serge Maandag]

If by config file you mean mrtg config file: no.

The way I described it means you'll have to write things yourself.
Just like the 'rrdtool graph ...' commands in the tutorial on the
rrdtool website.

Serge.

-----Original Message-----
From: Fisayo Adeleke [mailto:fisayo at steineng.com] 
Sent: Monday, April 07, 2003 1:53 AM
To: Serge Maandag; rrd-users at list.ee.ethz.ch
Subject: RE: [rrd-users] Re: Ecartis command results: appsub rrd-users
fisayo at steineng.com 3E8C9B93:2B16.1:eeqhfref


Hello,
 
Am i supposed to make these DEF statements in my config file or where?
 
thanks
 
-fiao

	-----Original Message----- 
	From: Serge Maandag [mailto:serge.maandag at staff.zeelandnet.nl] 
	Sent: Fri 4/4/2003 2:15 PM 
	To: Fisayo Adeleke; rrd-users at list.ee.ethz.ch 
	Cc: 
	Subject: RE: [rrd-users] Re: Ecartis command results: appsub
rrd-users fisayo at steineng.com 3E8C9B93:2B16.1:eeqhfref
	
	

	Yes,
	
	check the CDEF tutorial on the rrdtool website.
	What it comes down to is make 24 DEF statements and 1 CDEF
statement to
	add them together.
	
	like:
	
	DEF:port1=...
	....
	DEF:port24=...
	CDEF:port_all=port1,port2,+,port3,+,....port24,+
	AREA:port_all
	
	You could add CDEFs in between to turn unknown values into 0,
but that's
	also in the tutorial.
	
	Serge.
	
	-----Original Message-----
	From: Fisayo Adeleke [mailto:fisayo at steineng.com]
	Sent: Thursday, April 03, 2003 11:02 PM
	To: rrd-users at list.ee.ethz.ch
	Subject: [rrd-users] Re: Ecartis command results: appsub
rrd-users
	fisayo at steineng.com 3E8C9B93:2B16.1:eeqhfref
	
	
	Hi all,
	
	I just joined the rrd users. I have this question ... How do I
measure
	the aggregate traffic on e.g a 24 port switch. I mean apart from
the per
	port graph, can I have a single graph that aggregates entire
traffic
	across the switching box?
	
	Thanks
	
	        -fisayo
	
	
	::-----Original Message-----
	::From: rrd-users [mailto:listar at list.ee.ethz.ch]
	::Sent: Thursday, April 03, 2003 11:39 PM
	::To: Fisayo Adeleke
	::Subject: Ecartis command results: appsub rrd-users
	::fisayo at steineng.com 3E8C9B93:2B16.1:eeqhfref
	::
	::
	::
	::List context changed to 'rrd-users' by following command.
	::>> appsub rrd-users fisayo at steineng.com
3E8C9B93:2B16.1:eeqhfref
	::Subscribed.
	::
	::---
	::Ecartis v1.0.0 - job execution complete.
	::
	::
	
	--
	Unsubscribe
mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
	Help
mailto:rrd-users-request at list.ee.ethz.ch?subject=help
	Archive     http://www.ee.ethz.ch/~slist/rrd-users
	WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
	
	

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi