[rrd-users] Problems with building on Suse Linux 9.0

[Dan Willis]

Any thoughts regarding this?


----- Original Message ----- 
From: "Dan Willis" <groover4life at hotmail.com>
To: "Ralf Kruedewagen" <ralf-buero at kruedewagen.de>
Sent: Wednesday, June 06, 2007 10:52 AM
Subject: Re: [rrd-users] Problems with building on Suse Linux 9.0


> Here is my config.log.
>
> The errors I continously get are the following for libart and libpng:
> I could not find a working copy of libart-2.0.  Check config.log for hints
> on why this is the case.  Maybe you need to set the LDFLAGS and CPPFLAGS
> appropriately so that compiler and the linker can find libart_lgpl_2 and
its
> header files.  If you have not installed libart-2.0, you can get it from
> either...
>
> [links inserted here]
> LIBS=-lm
> LDFLAGS=
> CPPFLAGS= -I/usr/include/libart-2.0
>
> Now, here's the directories where my built libaries ended up:
> /lb/include/
> lb/include/libpng12
> lb/include/libart-2.0
>
> When I set the LDFLAGS and CPPFLAGS according to the instructions found
> here: http://oss.oetiker.ch/rrdtool/doc/rrdbuild.en.html but pointing them
> to the directories above, I still get the same error, but with the LDFLAGS
> and CPPFLAGS set to the folders above where my built libraries are...
>
> Now, I found libart and libpng on my machine preinstalled but I was unable
> to locate the header files anywhere, so I decided to try and build the
> libraries and point rrdtool's build to them...
>
> What do I need to do in order to get this built?
>
> Thanks in advance,
> Dan
>
> ----- Original Message ----- 
> From: "Ralf Kruedewagen" <ralf-buero at kruedewagen.de>
> To: <rrd-users at lists.oetiker.ch>
> Sent: Wednesday, June 06, 2007 2:21 AM
> Subject: Re: [rrd-users] Problems with building on Suse Linux 9.0
>
>
> > Hi Dan,
> >
> > building rrdtool 1.2 under (open)SUSE 10.0, 10.1 and 10.2 (64bit) was
> never a
> > problem for me.
> >
> > What error message do you get ? What is the output of "configure"
> > (config.log) ?
> >
> > BR
> > Ralf
> >
> > On Dienstag, 5. Juni 2007, Danny Willis wrote:
> > > Hi everyone,
> > >
> > > I have been using rrdtool version 1.1 for quite some time now, using
> Suse's
> > > default installation of the application.  I am now trying to upgrade
one
> of
> > > my applications which requires rrdtool 1.2.  Suse does not have a
built
> in
> > > update for rrdtool 1.2 so I have to install it manually.
> > >
> > > Of course there is no rpm for my specific build of Suse Linux (9.0
> > > Enterprise Server, 64-bit) so I need to build rrd.
> > >
> > > I am having the normal library problem where it is unable to located
the
> > > libpng and the libart libraries.  I have followed the instructions to
> > > download and manually build these libraries and then changed the
> > > environment variables to point to where the libraries and header files
> were
> > > placed, but I am still receiving the same error when trying the
> following
> > > command:
> > >
> > > /configure --prefix=$INSTALL_DIR
> > >
> > > Any ideas?  This is really gotten me hamstrung and I'm unable to
upgrade
> my
> > > applications until I am able to resolve this.  Any help is greatly
> > > appreciated.
> > >
> > > Best,
> > > Dan
> >
> > _______________________________________________
> > rrd-users mailing list
> > rrd-users at lists.oetiker.ch
> > https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users
> >
>