[smokeping-users] Re: Graphs Appearing but no reading

[mrtg user]

Dear larry,
my fping is installed and working
[root at system bin]# ./smokeping
### fping seems to report in 0.1 miliseconds
ERROR: I Quit! Another copy of ./smokeping (2537) seems to be running.
       Check /home/httpd/htdocs/smokeping/smokeping.pid
 
in conf file i have given ips not the names
 
[root at system bin]# ping 203.208.147.237
PING 203.208.147.237 (203.208.147.237) 56(84) bytes of data.
64 bytes from 203.208.147.237: icmp_seq=1 ttl=253 time=70.5 ms
64 bytes from 203.208.147.237: icmp_seq=2 ttl=253 time=70.4 ms
64 bytes from 203.208.147.237: icmp_seq=3 ttl=253 time=70.5 ms
[1]+  Stopped                 ping 203.208.147.237
 
Now reply me in this regard
 
Best Regards
Smokeping User

"Roberts, Larry" <Larry.Roberts at expanets.com> wrote:
doest your smokeping config file have IP's for targets or DNS names? If
your PNG's are empty it would appear to me that your not able to ping the
devices. 

I want to make sure if your config files use hostnames, that you are in fact
fpinging the hostnames not the IP's they resolve to.

you mention you don't know the fping command. You should have installed the
fping utility while installing smokeping. do an "updatedb" then "locate
fping" ( assuming your using linux ) and see if you have the file installed.
If not, I suspect that not having fping installed could be your problem.

Larry

_____ 

From: mrtg user [mailto:mrtguser at yahoo.com] 
Sent: Friday, February 27, 2004 10:57 AM
To: Roberts, Larry; smokeping-users at list.ee.ethz.ch
Subject: Re: [smokeping-users] Re: Graphs Appearing but no reading


Dear Robert,
thanks for the reply,
actually i can easily ping the ips which i want to ping from smokeping,now i
dont know if theres special command for fping,i used the ping command.
my .pngs are also created but the problem is that that are also empty not
showing the reading.
now i have no clue to this problem
Best Regards
Smokeping user

"Roberts, Larry" wrote:

Did you verify that fping can in fact ping the devices in question? Verify
that the names you have in your configuration are pingable first.

Secondly I would look the RRD files getting created. Are these files showing
data. I don't recall off the top of my head the exact syntax, but I know you
can query the RRD files to find out what they contain. Perhaps someone that
has a working system in front of them can tell you.

If your see the graphs,and they are refreshing then I would say your
permissions are most likely ok because they had to be created at some point.




-----Original Message-----
From: mrtg user [mailto:mrtguser at yahoo.com] 
Sent: Friday, February 27, 2004 10:03 AM
To: smokeping-users at list.ee.ethz.ch
Subject: [smokeping-users] Graphs Appearing but no reading

Dear Smokeping users,
i m new to smoke ping i have installed the smokeping and its working fine
just the problem is msopkeping is refreshing but not pl lo otting any
readings
only blank graphs...
can anyone tell me the issue!!!!
i have mentiond the permissions to apache to the img dir 

Really in trouble Smokeping user


---------------------------------
Do you Yahoo!?
Get better spam protection with Yahoo! Mail

--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi



_____ 

Do you Yahoo!?
Get better spam protection with Yahoo!
Mail



--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi


---------------------------------
Do you Yahoo!?
Get better spam protection with Yahoo! Mail

--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi