[smokeping-users] Re: Graphs not showing up
mchandler at solutions.canon.com
mchandler at solutions.canon.com
Thu Jul 13 04:59:07 MEST 2006
I installed from an RPM I found here:
http://ftp.nakedape.cc/ftp/nakedape/fc4/rpm/smokeping/
I'm just not comfortable making my own builds yet. I read all that
documentation and it seemed like it was missing information.
Here is my config.
# Note that all IP addresses in this file are false, to prevent some
# machine falling uder a deadly DOS storm because all users keep
# the same addresses in their config.
*** General ***
owner = Mel Chandler
contact = mchandler at solutions.canon.com
mailhost = mail.adne.solutions.canon.com
sendmail = /usr/lib/sendmail
pagedir = /var/www/smokeping/public_html
imgcache = /var/www/smokeping/public_html/.simg
imgurl = ../.simg
datadir = /var/www/smokeping/data
piddir = /var/www/smokeping/data
cgiurl = http://mrtg/cgi-bin/smokeping.cgi
smokemail = /etc/smokeping/smokemail
tmail = /etc/smokeping/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
*** Alerts ***
to = mchandler at solutions.canon.com
from = smokealert at solutions.canon.com
+bigloss
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>0%,>0%,>0%
comment = suddenly there is packet loss
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
+startloss
type = loss
# in percent
pattern = ==S,>0%,>0%,>0%
comment = loss at startup
+rttdetect
type = rtt
# in milli seconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing mesed up again ?
*** Database ***
step = 300
pings = 20
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /etc/smokeping/basepage.html
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
*** Probes ***
+ FPing
binary = /usr/sbin/fping
+ DNS
binary = /usr/bin/dig
lookup = name.example
pings = 5
step = 180
+ EchoPingHttp
pings = 5
url = /test-url
+ Curl
# probe-specific variables
binary = /usr/bin/curl
step = 60
# a default for this target-specific variable
urlformat = http://%host/
*** Targets ***
probe = FPing
menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of Canon Business Solutions-West.
\
+ CUSA
probe = FPing
menu = CUSA Router
title = CUSA WAN Connectivity
host = 10.62.251.13
alerts = bigloss,someloss,startloss
+ Internet
probe = FPing
menu = CUSA Cache Cluster
title = Internet Connectivity
host = cache.cusa.canon.com
alerts = bigloss,someloss,startloss
+ Oracle
probe = EchoPingHttp
menu = Oracle Server
title = Oracle Availability
host = prodapps.cusa.canon.com
url = http://%host%:6503
alerts = bigloss,someloss,startloss
+ DNS
probe = DNS
menu = DNS Server
title = DNS Server Latency
host = 10.208.2.12
+ CBSW-Branches
probe = FPing
menu = CBSW Branches
title = CBSW Branches Connectivity
++ Calabasas
probe = FPing
menu = CALAbasas
title = Calabasas, CA Connectivity
host = 10.209.48.2
++ Irvine
probe = FPing
menu = IRVIne
title = Irvine, CA Connectivity
host = 10.192.3.6
++ Phoenix
probe = FPing
menu = PHOEnix
title = Phoenix, AZ Connectivity
host = 10.209.24.2
++ Portland
probe = FPing
menu = PORTland
title = Portland, OR Connectivity
host = 10.209.16.2
++ Rancho-Cucamonga
probe = FPing
menu = RANCho Cucamonga
title = RAncho Cucamonga, CA
host = 10.209.72.2
++ San-Diego
probe = FPing
menu = SANDiego
title = San Diego, CA Connectivity
host = 10.209.32.3
++ San-Francisco
probe = FPing
menu = SANFrancisco
title = San Francisco, CA (Montgomery)
host = 10.209.8.2
++ South-San-Francisco
probe = FPing
menu = SSAN francisco
title = South San Francisco, CA
host = 10.209.40.2
++ Wilshire
probe = FPing
menu = WILShire
title = Wilshire, CA (Los Angeles)
host = 10.209.56.2
Mel Chandler, A+, Network+, MCSE, MCDBA, Master CNE, CCNA
Network Engineer
Information Technology
Canon Business Solutions
(310) 217-3893
GCS d--- s+: a C++ UL++++ P+ L++ E W+++ N++ o+ K- w+
O- M-- V- PS PE+ Y+ PGP+ t+ 5+ X+ R tv+ b- DI++++ D++
G e++ h-- r y+
hkclark at gmail.com
Sent by:
smokeping-users-b To
ounce at list.ee.eth "mchandler at solutions.canon.com"
z.ch <mchandler at solutions.canon.com>
cc
smokeping-users at list.ee.ethz.ch
07/12/2006 05:09 Subject
PM [smokeping-users] Re: Graphs not
showing up
On 7/12/06, mchandler at solutions.canon.com <mchandler at solutions.canon.com>
wrote:
> I've got smokeping up and running, with the exception it's not creating
the
> web page and graphics for everything. Is there any more documentation
> anywhere?
>
Hi Mel,
There is good documentation at:
http://oss.oetiker.ch/smokeping/doc/smokeping_install.en.html
and:
http://oss.oetiker.ch/smokeping/doc/smokeping_config.en.html
Make sure the "imgcache" is pointing to a directory that the smokeping
deamon and your web server can both get to. Also, make sure that the
"imgurl" setting is correct for you web server to be able to get to
the directory in the previous setting.
Hope that helps,
Kennedy
--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://lists.ee.ethz.ch/smokeping-users
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://lists.ee.ethz.ch/smokeping-users
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
More information about the smokeping-users
mailing list