[smokeping-users] AW: Re: Smokeping IOSPing
Andreas Schneider
Andreas.Schneider at Vishay.com
Tue May 2 09:30:52 MEST 2006
Hi,
this is what rsh produces on the commandline:
WSIZ10-RTT:~# rsh -l smokeping 172.43.6.11 ping
rcmd: 172.43.6.11: short readWSIZ10-RTT:~# ping 172.43.6.18
PING 172.43.6.18 (172.43.6.18) 56(84) bytes of data.
64 bytes from 172.43.6.18: icmp_seq=1 ttl=255 time=13.2 ms
64 bytes from 172.43.6.18: icmp_seq=2 ttl=255 time=1.55 ms
64 bytes from 172.43.6.18: icmp_seq=3 ttl=255 time=1.56 ms
64 bytes from 172.43.6.18: icmp_seq=4 ttl=255 time=1.50 ms
64 bytes from 172.43.6.18: icmp_seq=5 ttl=255 time=1.55 ms
64 bytes from 172.43.6.18: icmp_seq=6 ttl=255 time=1.52 ms
--- 172.43.6.18 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5048ms
rtt min/avg/max/mdev = 1.505/3.491/13.234/4.357 ms
WSIZ10-RTT:~#
I have to tell that 172.43.6.11 ist a Catalyst4006 Switch with IOS Version 12.2
After i typed 'rsh -l smokeping 172.43.6.11 ping' , i have to enter the 'ping 172.43.6.18 <ENTER>'
to
get the ping going.
Regards,
Andreas
-----Ursprungliche Nachricht-----
Von: Niko Tyni [mailto:ntyni+smokeping-users at mappi.helsinki.fi]
Gesendet: Dienstag, 2. Mai 2006 08:09
An: Andreas Schneider
Cc: smokeping-users
Betreff: Re: [smokeping-users] Re: Smokeping IOSPing
On Fri, Apr 28, 2006 at 09:24:28AM +0200, Andreas Schneider wrote:
> sorry for the confusion! Yes i send several mails, because sometimes the mail i send
> or receive is filtered and is not delivered. And so i don't know if it reaches the list.
> I still have problems with TelnetIOSPing or IOSPing. I do not insist on TelnetIOSPing or IOSPing
> i just want to measure connectivity between two cisco-devices or from a cisco-device to a network
> device.
>
> I attached the smokeping --debug output and the config file.
OK, the problem is here:
> rcmd: 172.43.6.11: short readIOSPing: 172.43.6.18: got
Looks like there's a problem with getting the rsh connection.
Are you sure that rsh access to the router is enabled? Can you
log into it with rsh from the command line on your Smokeping
server?
Cheers,
--
Niko Tyni ntyni at iki.fi
--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://lists.ee.ethz.ch/smokeping-users
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
More information about the smokeping-users
mailing list