[smokeping-users] Re: Smokeping IOSPing

[Niko Tyni]

On Tue, May 02, 2006 at 09:30:52AM +0200, Andreas Schneider wrote:
 
> this is what rsh produces on the commandline:
> 
> WSIZ10-RTT:~# rsh -l smokeping 172.43.6.11 ping
> rcmd: 172.43.6.11: short readWSIZ10-RTT:~# ping 172.43.6.18
> PING 172.43.6.18 (172.43.6.18) 56(84) bytes of data.
> 64 bytes from 172.43.6.18: icmp_seq=1 ttl=255 time=13.2 ms
> 64 bytes from 172.43.6.18: icmp_seq=2 ttl=255 time=1.55 ms
> 64 bytes from 172.43.6.18: icmp_seq=3 ttl=255 time=1.56 ms
> 64 bytes from 172.43.6.18: icmp_seq=4 ttl=255 time=1.50 ms
> 64 bytes from 172.43.6.18: icmp_seq=5 ttl=255 time=1.55 ms
> 64 bytes from 172.43.6.18: icmp_seq=6 ttl=255 time=1.52 ms
> 
> --- 172.43.6.18 ping statistics ---
> 6 packets transmitted, 6 received, 0% packet loss, time 5048ms
> rtt min/avg/max/mdev = 1.505/3.491/13.234/4.357 ms
> WSIZ10-RTT:~#
> 
> I have to tell that 172.43.6.11 ist a Catalyst4006 Switch with IOS Version 12.2
> After i typed 'rsh -l smokeping 172.43.6.11 ping' , i have to enter the 'ping 172.43.6.18 <ENTER>'
> to
> get the ping going.

This looks like you aren't pinging anything with the router, but
rather the WSIZ10-RTT host. The 'short read' is a fatal error,
and you end back on the WSIZ10-RTT command line.

Try to get rsh access working first, or maybe better switch to
TelnetIOSPing. If that's still not working either, send a new
'smokeping --debug' output about that.

Cheers,
-- 
Niko

--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive     http://lists.ee.ethz.ch/smokeping-users
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi