[smokeping-users] Alert after 400 bandwith

[Jan Rockstedt]

Hi Tobi,

Yes the text is ok, but not sufficient for a newbie on pattern.
It should say something how to test the value for optimize.
For example to test started with the simple pattern.
It is easy to run default <10,<10,<10,<10,<10,>10,>100,>100,>100 and not
know if this is optimal.

//Jan



2008/8/19 Tobias Oetiker <tobi at oetiker.ch>

> Hi Jan,
>
> have you read the Alerts section on
>
> http://oss.oetiker.ch/smokeping/doc/smokeping_config.en.html
>
> if you have stuff to add, please let me know, I'll be glad to
> integrate.
>
> cheers
> tobi
>
> Today Jan Rockstedt wrote:
>
> > Thanks Tobi,
> >
> > I have started to understand now the pattern.
> > Mabye you could write something of this on the web?
> >
> > I started with the simple pattern >400 and decrease the value to the
> right,
> > after a couple of alerts.
> >
> > I have searth on google and found somebody how should creat a calculator
> for
> > jitter, etc.
> > Anybody who have this?
> >
> > //Jan
> >
> > 2008/8/19 Tobias Oetiker <tobi at oetiker.ch>
> >
> > > Hi Jan,
> > >
> > > with the pattern you have you will get an alert if smokeping has
> > > been running for
> > >
> > > 9 steps (9*300 seconds) and the last 3 measurements had a median
> > > over 400 while the first 6 had one under 400
> > >
> > > the trick with these patterns is that you can make it so that they
> > > only fire when a particular condition first occures ...
> > >
> > > alternatively you can also use simple patterns
> > >
> > > pattern = >400
> > >
> > > and enable edge detection ...
> > >
> > > cheers
> > > tobi
> > >
> > >
> > > Today Jan Rockstedt wrote:
> > >
> > > > Thanks,
> > > >
> > > > But me configuration dosent work ok.
> > > > I dont get any alert and I am over 400ms.
> > > > For how long time "with below pattern" must the 400ms be to get an a
> > > alert?
> > > >
> > > > +rttdetect
> > > > type = rtt
> > > > # in milli seconds
> > > > pattern = <400,<400,<400,<400,<400,<400,>400,>400,>400
> > > > comment = routing mesed up again ?
> > > > //Jan
> > > >
> > > > 2008/8/19 Tobias Oetiker <tobi at oetiker.ch>
> > > >
> > > > > Hi Jan,
> > > > >
> > > > > yes, this is exactly what this feature is for ... with the pattern
> > > > > you describe what you are looking for ...
> > > > >
> > > > > cheers
> > > > > tobi
> > > > >  Today Jan Rockstedt wrote:
> > > > >
> > > > > > Hi again,
> > > > > >
> > > > > > Can I use the rttdect "see below config" to get a alert if one of
> me
> > > site
> > > > > > exceed 400 ms of ping time?
> > > > > > I am trying to find any documentation about howto setup this.
> > > > > >
> > > > > > +rttdetect
> > > > > > type = rtt
> > > > > > # in milli seconds
> > > > > > pattern = <400,<400,<400,<400,<400,<400,>400,>400,>400
> > > > > > comment = Routing problem?
> > > > > > Jan Rockstedt
> > > > > >
> > > > > >
> > > > > > >Hi all,
> > > > > > >
> > > > > > >We have version 2.3.6 of smokeping.
> > > > > > >Is it posible to setup smokeping to send out a alert if one of
> our
> > > site
> > > > > > >exceed 400 Mbit "ping" bandwith?
> > > > > > >Any example for this?
> > > > > > >
> > > > > > >Regards Jan Rockstedt
> > > > > >
> > > > >
> > > > > --
> > > > > Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten,
> Switzerland
> > > > > http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
> > > > >
> > > >
> > >
> > > --
> > >  Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
> > > http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
> > >
> >
>
> --
>  Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
> http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20080819/591c1773/attachment.html