[smokeping-users] Alert after 400 bandwith

[Tobias Oetiker]

Hi Jan,

have you read the Alerts section on

http://oss.oetiker.ch/smokeping/doc/smokeping_config.en.html

if you have stuff to add, please let me know, I'll be glad to
integrate.

cheers
tobi

Today Jan Rockstedt wrote:

> Thanks Tobi,
>
> I have started to understand now the pattern.
> Mabye you could write something of this on the web?
>
> I started with the simple pattern >400 and decrease the value to the right,
> after a couple of alerts.
>
> I have searth on google and found somebody how should creat a calculator for
> jitter, etc.
> Anybody who have this?
>
> //Jan
>
> 2008/8/19 Tobias Oetiker <tobi at oetiker.ch>
>
> > Hi Jan,
> >
> > with the pattern you have you will get an alert if smokeping has
> > been running for
> >
> > 9 steps (9*300 seconds) and the last 3 measurements had a median
> > over 400 while the first 6 had one under 400
> >
> > the trick with these patterns is that you can make it so that they
> > only fire when a particular condition first occures ...
> >
> > alternatively you can also use simple patterns
> >
> > pattern = >400
> >
> > and enable edge detection ...
> >
> > cheers
> > tobi
> >
> >
> > Today Jan Rockstedt wrote:
> >
> > > Thanks,
> > >
> > > But me configuration dosent work ok.
> > > I dont get any alert and I am over 400ms.
> > > For how long time "with below pattern" must the 400ms be to get an a
> > alert?
> > >
> > > +rttdetect
> > > type = rtt
> > > # in milli seconds
> > > pattern = <400,<400,<400,<400,<400,<400,>400,>400,>400
> > > comment = routing mesed up again ?
> > > //Jan
> > >
> > > 2008/8/19 Tobias Oetiker <tobi at oetiker.ch>
> > >
> > > > Hi Jan,
> > > >
> > > > yes, this is exactly what this feature is for ... with the pattern
> > > > you describe what you are looking for ...
> > > >
> > > > cheers
> > > > tobi
> > > >  Today Jan Rockstedt wrote:
> > > >
> > > > > Hi again,
> > > > >
> > > > > Can I use the rttdect "see below config" to get a alert if one of me
> > site
> > > > > exceed 400 ms of ping time?
> > > > > I am trying to find any documentation about howto setup this.
> > > > >
> > > > > +rttdetect
> > > > > type = rtt
> > > > > # in milli seconds
> > > > > pattern = <400,<400,<400,<400,<400,<400,>400,>400,>400
> > > > > comment = Routing problem?
> > > > > Jan Rockstedt
> > > > >
> > > > >
> > > > > >Hi all,
> > > > > >
> > > > > >We have version 2.3.6 of smokeping.
> > > > > >Is it posible to setup smokeping to send out a alert if one of our
> > site
> > > > > >exceed 400 Mbit "ping" bandwith?
> > > > > >Any example for this?
> > > > > >
> > > > > >Regards Jan Rockstedt
> > > > >
> > > >
> > > > --
> > > > Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
> > > > http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
> > > >
> > >
> >
> > --
> >  Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
> > http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900
> >
>

-- 
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900