[smokeping-users] Detailed graph flat green line

Fabian Phang fabian.phang at rmc.ca
Tue May 26 14:44:39 CEST 2009


Windows XP
Smokeping 2.2.4
WampServer 2.0H 

Hello,

I am very new to Smokeping and I've had a very hard time getting results. I am trying to ping 2 temp and humidity sensors. The Overview graph seem incomplete and the detailed graph just gives me a flat green line. Can anyone help. Here is my config and links to screenshots.

Thank You Kindly

Fabian


Some Data No Data
http://g.imagehost.org/0881/Smokeping_1.jpg

Flat Green Line
http://g.imagehost.org/0044/Smokeping_2.jpg


CMD Ping to Host
http://g.imagehost.org/0978/Smokeping_3.jpg

#######################################################
###  smokeping/conf   BEGIN
#######################################################

*** General ***
### General - define your email options, html
### directories and urls

owner    = smokeping
contact  = x at x.com
mailhost = xxxxxxx
#sendmail = /usr/lib/sendmail
imgcache = C:/wamp/www/simg
imgurl   = ../simg
datadir  = C:/smokeping-2.2.4/var
piddir  = C:/smokeping-2.2.4/var
cgiurl   = http://localhost/cgi-bin/smokeping.pl
smokemail = C:/smokeping-2.2.4/etc/smokemail.dist
tmail = C:/smokeping-2.2.4/etc/tmail.dist

# specify this to get syslog logging
# syslogfacility = local0

# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no

*** Alerts ***
### Alerts - specify who email alerts will go to 

to = x at x.com
from = smokealert at localhost

### Alert Conditions - At what point will mail be sent?
### Here we are saying that if any host is at no
### packets loss (<100% = good) and then going down to
### more than 50% packet loss for at lease 2 sequential
### checks then send out an alert email to the
### recipients listed above.

+bigloss
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>0%,>0%,>0%
comment = suddenly there is packet loss

+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times  in a row

+startloss
type = loss
# in percent
pattern = ==S,>0%,>0%,>0%
comment = loss at startup

+rttdetect
type = rtt
# in milli seconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing messed up again ?

+hostdown
type = loss
# in percent
pattern = ==0%,==0%,==0%, ==U
comment = no reply

+lossdetect
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
comment = suddenly there is packet loss

*** Database ***

### Database - smokeping is set to ping 20 times
### per 5 minute (300 second) interval. The following
### shows consfn mrhb steps total which is the
### resolution of the database. 

#step     = 30
#pings    = 20
#
## consfn mrhb steps total
#
#AVERAGE 0.5   1  20160 #7-day worth 30-second avg
#AVERAGE 0.5   10  8640  #30-day worth 5-minute avg 
#AVERAGE 0.5   30 38400 #400-day worth 15-minute avg
#MIN 0.5 10 8640 
#MAX 0.5 10 8640 
#MIN 0.5 30 38400 
#MAX 0.5 30 38400 

step     = 300
pings    = 20

# consfn mrhb steps total

AVERAGE  0.5   1  1008
AVERAGE  0.5  12  4320
    MIN  0.5  12  4320
    MAX  0.5  12  4320
AVERAGE  0.5 144   720
    MAX  0.5 144   720
    MIN  0.5 144   720

*** Presentation ***
### Presentation -This what the report pages will
### look like and where they will be placed

template = C:/smokeping-2.2.4/etc/basepage.html.dist

+ charts

menu = Charts
title = The most interesting destinations

++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Stdandard Deviation %f

++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds

++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f

++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median    
format = Median RTT %f seconds

#
## The generalized first page graph
#
+ overview 

width = 600
height = 100
range = 10h

+ detail

width = 600
height = 200
unison_tolerance = 8

## How many graphs and at what time
## period do you want?

"Last 3 Hours"    3h
"Last 30 Hours"   30h
"Last 10 Days"    10d
"Last 400 Days"   400d

*** Probes ***

### Probes - The is where we define we want to
### use icmp through fping. We also need to tell
### smokeping where fping resides

+ FPing

binary = C:/smokeping-2.2.4/fping/fping.exe

*** Targets ***
###Targets - What machines are we going to ping?

probe = FPing

## name the html page the following

menu = Top
title = SmokePing Network Latency Grapher
remark = SmokePing Network Latency Grapher         
         
## Our top network tree is "+ Network"
## Notice the single "+"

+ RMC_Network
menu = Temperature Sensors
title = Temperature Sensors

## Sub network machine 
## Notice the two "++" which means it is under "+ Network"

++ S2128_TempSensor7
#menu = Sawyer 2128
title = S2128
host = 137.94.132.17
#alerts = rttdetect,hostdown


++ S2128_TempSensor8
#menu = Sawyer 2129
title = S2129
host = 137.94.132.18
#alerts = rttdetect,hostdown

#######################################################
###   smokeping/conf   END
#######################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20090526/d66ce225/attachment-0001.html 


More information about the smokeping-users mailing list