[smokeping-users] How to bind multi local IP address ?

[Tobias Oetiker]

Hi Calvin,

Today Calvin Park wrote:

> Hello SmokePing Users ~
>
> I have plan that SmokePing check the network latency of many ISP lines.
> My single linux host has many ip address.
> ex)
> 10.0.0.1 /24   ( local IP 1 )
> 10.0.1.1 /24   ( local IP 2 )
> 10.0.2.1 /24   ( local IP 3 )
> 10.0.3.1 /24   ( local IP 4 )
> ...
> and that's IP addresses have each GW IP addresses and I applied source
> routing like belows.
>
> ip route add 10.0.0.1/24 via 10.0.0.254      ( ISP A )
> ip route add 10.0.1.1/24 via 10.0.1.254      ( ISP B )
> ip route add 10.0.2.1/24 via 10.0.2.254      ( ISP C )
> ...
>
> I need SmokePing option about local IP address binding.
>
> ex)
> smokeping --bind-address=10.0.0.1 ; smokeping --bind-address=10.0.1.1
> ; smokeping --bind-address=10.0.2.1 ...
>
> How can I do ?

smokeping itselv does not know about IP addresses, it just directs
the probes ... some probes allow you to specify the sender (bind)
address ... for fping there is a patched version on the smokeping
download page which allows that (together with the trunk snapshot
of smokeping).

cheers
tobi

>
> _______________________________________________
> smokeping-users mailing list
> smokeping-users at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
>

-- 
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900