[smokeping-users] no data in graphs
Erlington Cardoza
erlington.j at gmail.com
Tue Mar 11 20:22:07 CET 2014
Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
it was a RRD, so the conf was on Target section. I commented.
Also I saw this part:
FPing: Got fping output: '/usr/bin/fping: cannot bind source address :
Cannot assign requested address
I realize mi source IP was being natted, so I change it and It works!!!.
Thanks a lot
2014-03-11 20:02 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
> Here's the error:
>
> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
>
> Check that file
>
> Also, when you reply please use "reply all" so the mailing list has all
> the updates for this thread.
>
>
> On Tue, Mar 11, 2014 at 12:59 PM, Erlington Cardoza <erlington.j at gmail.com
> > wrote:
>
>> after all the calculations it says,
>>
>> Smokeping version 2.006008 successfully launched.
>> Not entering multiprocess mode with '--debug'. Use '--debug-daemon' for
>> that.
>> FPing: probing 2 targets with step 300 s and offset 26 s.
>> FPing: Executing /usr/bin/fping -C 21 -q -B1 -r1 -b5000 -t5000 -i1 -p1500
>> -S192.168.1.200 -O0x20 192.168.1.101 localhost
>> FPing: Got fping output: '/usr/bin/fping: cannot bind source address :
>> Cannot assign requested address'
>> Calling RRDs::update(/var/lib/smokeping/Luminet/LocalMachine.rrd
>> --template
>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20
>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U)
>> Alert "someloss": no match for target
>> /var/lib/smokeping/Luminet/LocalMachine
>> Calling RRDs::update(/var/lib/smokeping/Columbus/Columbus.rrd --template
>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20
>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U)
>> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
>>
>>
>>
>> 2014-03-11 19:43 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>
>> read the manual,
>>>
>>> it says --config=x Use a config file different from the default
>>>
>>>
>>> On Tue, Mar 11, 2014 at 12:42 PM, Erlington Cardoza <
>>> erlington.j at gmail.com> wrote:
>>>
>>>>
>>>> Option c is ambiguous (cache-dir, check, config)
>>>> Usage:
>>>> smokeping [ --email | --makepod | --version | --restart ]
>>>>
>>>> Options:
>>>>
>>>> --man[=x] Show the manpage for the program (or for probe x, if
>>>> specified)
>>>>
>>>> --help Help :-)
>>>>
>>>> --email Send SmokePing Agents to all Targets marked DYNAMIC
>>>>
>>>> --config=x Use a config file different from the default
>>>>
>>>> --check Just check the config file syntax, don't start the
>>>> daemon
>>>>
>>>> --makepod[=x] Create POD documentation on Config file (or for
>>>> probe x, if specified)
>>>>
>>>> --version Show SmokePing Version
>>>>
>>>> --debug Run Only once and do not Fork
>>>>
>>>> --debug-daemon Start the daemon with debugging enabled
>>>>
>>>> --restart Restart SmokePing
>>>>
>>>> --reload Reload configuration in the running process without
>>>> interrupting
>>>> any probes
>>>>
>>>> --nodaemon Do no daemonize the process (no fork)
>>>>
>>>> --filter=x Only measure entries which pass the filter x
>>>>
>>>> --logfile=x Append warnings to logfile x.
>>>>
>>>> --static[=x] Generates a static website in directory x. If x is
>>>> left out,
>>>> pagedir from the config is used.
>>>>
>>>> --nosleep For debugging you may want to run SmokePing without
>>>> sleep interval
>>>>
>>>> --gen-examples Generate the smokeping_examples document and
>>>> example config files
>>>> (to be used while building inside the smokeping
>>>> distribution)
>>>> With --check : check the syntax of the generated
>>>> examples.
>>>>
>>>> --master-url=s Run smokeping in slave mode. Attach to master for
>>>> config.
>>>>
>>>> --slave-name=s By default the slave will use whatever it thinks
>>>> its name
>>>> is, when talking to its master. In some cases you
>>>> may
>>>> probably want to override this.
>>>>
>>>>
>>>> --shared-secret=s File containing the shared secret for talking to
>>>> the server.
>>>>
>>>> --cache-dir=s Directory for temporary data storage when running in
>>>> slave mode.
>>>>
>>>> --pid-dir=s Directory for the PID file when running in slave mode.
>>>> (optional, defaults to --cache-dir)
>>>>
>>>>
>>>>
>>>> 2014-03-11 19:37 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>
>>>> stop smokeping and run it from the console with
>>>>>
>>>>> smokeping -c /path/to/config_file --nodaemon --debug
>>>>>
>>>>> and see what errors you get
>>>>>
>>>>>
>>>>> On Tue, Mar 11, 2014 at 12:22 PM, Erlington Cardoza <
>>>>> erlington.j at gmail.com> wrote:
>>>>>
>>>>>> Ok let`s change the public IP into a private so is still the same
>>>>>> issue, At the beginning I thought it was an IP problem for security and I
>>>>>> tested before but nothing changed. So here is the conf with private IP as I
>>>>>> have right know.
>>>>>> *** General ***
>>>>>>
>>>>>> owner = Jade Fox
>>>>>> contact = Fox at mail.cr
>>>>>> mailhost = mx.mail.cr
>>>>>> # NOTE: do not put the Image Cache below cgi-bin
>>>>>> # since all files under cgi-bin will be executed ... this is not
>>>>>> # good for images.
>>>>>> cgiurl = http://192.168.1.200/smokeping.cgi
>>>>>> # specify this to get syslog logging
>>>>>> syslogfacility = local0
>>>>>> # each probe is now run in its own process
>>>>>> # disable this to revert to the old behaviour
>>>>>> # concurrentprobes = no
>>>>>>
>>>>>> @include /etc/smokeping/config.d/pathnames
>>>>>>
>>>>>> Regarding the other suggestion, I have this files:
>>>>>> root at Fox:/etc/smokeping/config.d# ls
>>>>>> Alerts General Presentation sendmail Targets
>>>>>> Database pathnames Probes Slaves
>>>>>>
>>>>>> In alerts I have values from smokeping webpage:
>>>>>>
>>>>>> +someloss
>>>>>> type = loss
>>>>>> # in percent
>>>>>> pattern = >0%,*12*,>0%,*12*,>0%
>>>>>> comment = loss 3 times in a row
>>>>>>
>>>>>> +lossdetect
>>>>>> type = loss
>>>>>> # in percent
>>>>>> pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
>>>>>> comment = suddenly there is packet loss
>>>>>>
>>>>>> +miniloss
>>>>>> type = loss
>>>>>> # in percent
>>>>>> pattern = >0%,*12*,>0%,*12*,>0%
>>>>>> comment = detected loss 3 times over the last two hours
>>>>>>
>>>>>> +rttdetect
>>>>>> type = rtt
>>>>>> # in milliseconds
>>>>>> pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
>>>>>> comment = routing messed up again ?
>>>>>>
>>>>>> +rttbadstart
>>>>>> type = rtt
>>>>>> # in milliseconds
>>>>>> pattern = ==S,==U
>>>>>> comment = offline at startup
>>>>>>
>>>>>> In targets :
>>>>>>
>>>>>> *** Targets ***
>>>>>>
>>>>>> probe = FPing
>>>>>> menu = Top
>>>>>> title = Network Latency Grapher
>>>>>> remark = Welcome to the SmokePing website of xxx Company. \
>>>>>> Here you will learn all about the latency of our network.
>>>>>>
>>>>>> + Luminet
>>>>>>
>>>>>> menu = Luminet
>>>>>> title = Local Network
>>>>>> alerts = someloss
>>>>>>
>>>>>> ++ LocalMachine
>>>>>>
>>>>>> menu = Local Machine
>>>>>> title = This host
>>>>>> host = localhost
>>>>>> alerts = someloss
>>>>>>
>>>>>> + Colom
>>>>>> menu = Colom
>>>>>> title = Colom
>>>>>>
>>>>>> ++Colom
>>>>>> title = ICMP Colom
>>>>>> host = 192.168.1.101
>>>>>> alerts = someloss
>>>>>>
>>>>>> in Probes:
>>>>>> +FPing
>>>>>>
>>>>>> binary = /usr/bin/fping
>>>>>>
>>>>>> And that's all I have configured.
>>>>>> Regards
>>>>>>
>>>>>>
>>>>>> 2014-03-11 19:09 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>
>>>>>> There is little help I can provide if you don't share all your
>>>>>>> config.
>>>>>>> You say that you replaced the values yet in the config you shared I
>>>>>>> see:
>>>>>>>
>>>>>>> cgiurl = http://my.domain/smokeping.cgi
>>>>>>>
>>>>>>> and also, that's not the only config file you need to work on, you
>>>>>>> also need to look in the files in /etc/smokeping/conf.d
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Mar 11, 2014 at 12:06 PM, Erlington Cardoza <
>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>
>>>>>>>> Yes, I replace the values in this email for security because it has
>>>>>>>> a public IP, if not I couldn`t see that my graph has not data...
>>>>>>>>
>>>>>>>>
>>>>>>>> 2014-03-11 19:03 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>>
>>>>>>>> But you need to replace your cgiurl value, is your "my.domain"
>>>>>>>>> really your domain? you need to know at least the ip of your server.
>>>>>>>>> Do you know the ip of it?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Mar 11, 2014 at 11:56 AM, Erlington Cardoza <
>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Yeah sorry for my lost, in that guide the config file has the
>>>>>>>>>> same configuration of my General file I showed you before.
>>>>>>>>>> /etc/smokeping/config.d/General:
>>>>>>>>>>
>>>>>>>>>> *** General ***
>>>>>>>>>>
>>>>>>>>>> owner = my owner
>>>>>>>>>> contact = owner at mail.com
>>>>>>>>>> mailhost = mx.mail.com
>>>>>>>>>> # NOTE: do not put the Image Cache below cgi-bin
>>>>>>>>>> # since all files under cgi-bin will be executed ... this is not
>>>>>>>>>> # good for images.
>>>>>>>>>> cgiurl = http://my.domain/smokeping.cgi
>>>>>>>>>> # specify this to get syslog logging
>>>>>>>>>> syslogfacility = local0
>>>>>>>>>> # each probe is now run in its own process
>>>>>>>>>> # disable this to revert to the old behaviour
>>>>>>>>>> # concurrentprobes = no
>>>>>>>>>>
>>>>>>>>>> @include /etc/smokeping/config.d/pathnames
>>>>>>>>>>
>>>>>>>>>> I guess it is an older version of smokeping.
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2014-03-11 18:47 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>>>>
>>>>>>>>>> So you are really lost.
>>>>>>>>>>> Follow a howto like this
>>>>>>>>>>> http://www.howtoforge.com/monitoring_network_latency_smokeping_debian_etch
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:44 AM, Erlington Cardoza <
>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> I`m sorry in the guide I followed it just said type "sudo
>>>>>>>>>>>> apt-get install smokeping". I searched that config file with "find" and I
>>>>>>>>>>>> found this one: /etc/smokeping/config, and it has this config:
>>>>>>>>>>>>
>>>>>>>>>>>> @include /etc/smokeping/config.d/General
>>>>>>>>>>>> @include /etc/smokeping/config.d/Alerts
>>>>>>>>>>>> @include /etc/smokeping/config.d/Database
>>>>>>>>>>>> @include /etc/smokeping/config.d/Presentation
>>>>>>>>>>>> @include /etc/smokeping/config.d/Probes
>>>>>>>>>>>> @include /etc/smokeping/config.d/Slaves
>>>>>>>>>>>> @include /etc/smokeping/config.d/Targets
>>>>>>>>>>>>
>>>>>>>>>>>> is that what you`re talking about?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-03-11 18:34 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>> The smokeping config file. Do you know where is it?
>>>>>>>>>>>>> Did you follow a howto to install and configure it?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Kwame
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:33 AM, Erlington Cardoza <
>>>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Which configuration do you need? smokeping conf or Debian?.
>>>>>>>>>>>>>> Which command I need to use?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2014-03-11 18:31 GMT+01:00 Kwame Bahena <informatux at gmail.com
>>>>>>>>>>>>>> >:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You have an error on your config file.
>>>>>>>>>>>>>>> The error says that the file or directory /etc/config does
>>>>>>>>>>>>>>> not exist.
>>>>>>>>>>>>>>> Can you pastebin your config some place and share it?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Kwame
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:27 AM, Erlington Cardoza <
>>>>>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hey guys, first of all, thanks to oetiker for this
>>>>>>>>>>>>>>>> excellent tool.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Second, I have done the command ( smoke --debug ) and my
>>>>>>>>>>>>>>>> smokeping says "ERROR: loading smokeping configuration
>>>>>>>>>>>>>>>> file /usr/sbin/../etc/config: No such file or directory".
>>>>>>>>>>>>>>>> I am using Debian but I am not a master in this O.S by the way. Also, my
>>>>>>>>>>>>>>>> local machine does graphics with data but my other host does not appear the
>>>>>>>>>>>>>>>> data. In my desesperation I did assigned all of possible permissions to the
>>>>>>>>>>>>>>>> other host, like this "-rwx-rwx-rwx 1 smokeping www-data" and I still dont
>>>>>>>>>>>>>>>> have data in the new graphic, but in the local machine I do have and Im not
>>>>>>>>>>>>>>>> using master-slave configuration. What can I do?.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks and Regards
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> smokeping-users mailing list
>>>>>>>>>>>>>>>> smokeping-users at lists.oetiker.ch
>>>>>>>>>>>>>>>> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20140311/b0b79807/attachment-0001.htm
More information about the smokeping-users
mailing list