[smokeping-users] no data in graphs
Kwame Bahena
informatux at gmail.com
Tue Mar 11 20:30:17 CET 2014
Excellent, glad it's now working.
Cheers,
--
Kwame
On Tue, Mar 11, 2014 at 1:22 PM, Erlington Cardoza <erlington.j at gmail.com>wrote:
> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
>
> it was a RRD, so the conf was on Target section. I commented.
>
> Also I saw this part:
>
> FPing: Got fping output: '/usr/bin/fping: cannot bind source address :
> Cannot assign requested address
>
>
> I realize mi source IP was being natted, so I change it and It works!!!.
> Thanks a lot
>
>
> 2014-03-11 20:02 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>
> Here's the error:
>>
>> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
>>
>> Check that file
>>
>> Also, when you reply please use "reply all" so the mailing list has all
>> the updates for this thread.
>>
>>
>> On Tue, Mar 11, 2014 at 12:59 PM, Erlington Cardoza <
>> erlington.j at gmail.com> wrote:
>>
>>> after all the calculations it says,
>>>
>>> Smokeping version 2.006008 successfully launched.
>>> Not entering multiprocess mode with '--debug'. Use '--debug-daemon' for
>>> that.
>>> FPing: probing 2 targets with step 300 s and offset 26 s.
>>> FPing: Executing /usr/bin/fping -C 21 -q -B1 -r1 -b5000 -t5000 -i1
>>> -p1500 -S192.168.1.200 -O0x20 192.168.1.101 localhost
>>> FPing: Got fping output: '/usr/bin/fping: cannot bind source address :
>>> Cannot assign requested address'
>>> Calling RRDs::update(/var/lib/smokeping/Luminet/LocalMachine.rrd
>>> --template
>>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20
>>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U)
>>> Alert "someloss": no match for target
>>> /var/lib/smokeping/Luminet/LocalMachine
>>> Calling RRDs::update(/var/lib/smokeping/Columbus/Columbus.rrd --template
>>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20
>>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U)
>>> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
>>>
>>>
>>>
>>> 2014-03-11 19:43 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>
>>> read the manual,
>>>>
>>>> it says --config=x Use a config file different from the default
>>>>
>>>>
>>>> On Tue, Mar 11, 2014 at 12:42 PM, Erlington Cardoza <
>>>> erlington.j at gmail.com> wrote:
>>>>
>>>>>
>>>>> Option c is ambiguous (cache-dir, check, config)
>>>>> Usage:
>>>>> smokeping [ --email | --makepod | --version | --restart ]
>>>>>
>>>>> Options:
>>>>>
>>>>> --man[=x] Show the manpage for the program (or for probe x, if
>>>>> specified)
>>>>>
>>>>> --help Help :-)
>>>>>
>>>>> --email Send SmokePing Agents to all Targets marked DYNAMIC
>>>>>
>>>>> --config=x Use a config file different from the default
>>>>>
>>>>> --check Just check the config file syntax, don't start the
>>>>> daemon
>>>>>
>>>>> --makepod[=x] Create POD documentation on Config file (or for
>>>>> probe x, if specified)
>>>>>
>>>>> --version Show SmokePing Version
>>>>>
>>>>> --debug Run Only once and do not Fork
>>>>>
>>>>> --debug-daemon Start the daemon with debugging enabled
>>>>>
>>>>> --restart Restart SmokePing
>>>>>
>>>>> --reload Reload configuration in the running process without
>>>>> interrupting
>>>>> any probes
>>>>>
>>>>> --nodaemon Do no daemonize the process (no fork)
>>>>>
>>>>> --filter=x Only measure entries which pass the filter x
>>>>>
>>>>> --logfile=x Append warnings to logfile x.
>>>>>
>>>>> --static[=x] Generates a static website in directory x. If x is
>>>>> left out,
>>>>> pagedir from the config is used.
>>>>>
>>>>> --nosleep For debugging you may want to run SmokePing without
>>>>> sleep interval
>>>>>
>>>>> --gen-examples Generate the smokeping_examples document and
>>>>> example config files
>>>>> (to be used while building inside the smokeping
>>>>> distribution)
>>>>> With --check : check the syntax of the generated
>>>>> examples.
>>>>>
>>>>> --master-url=s Run smokeping in slave mode. Attach to master for
>>>>> config.
>>>>>
>>>>> --slave-name=s By default the slave will use whatever it thinks
>>>>> its name
>>>>> is, when talking to its master. In some cases you
>>>>> may
>>>>> probably want to override this.
>>>>>
>>>>>
>>>>> --shared-secret=s File containing the shared secret for talking
>>>>> to the server.
>>>>>
>>>>> --cache-dir=s Directory for temporary data storage when running
>>>>> in slave mode.
>>>>>
>>>>> --pid-dir=s Directory for the PID file when running in slave mode.
>>>>> (optional, defaults to --cache-dir)
>>>>>
>>>>>
>>>>>
>>>>> 2014-03-11 19:37 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>
>>>>> stop smokeping and run it from the console with
>>>>>>
>>>>>> smokeping -c /path/to/config_file --nodaemon --debug
>>>>>>
>>>>>> and see what errors you get
>>>>>>
>>>>>>
>>>>>> On Tue, Mar 11, 2014 at 12:22 PM, Erlington Cardoza <
>>>>>> erlington.j at gmail.com> wrote:
>>>>>>
>>>>>>> Ok let`s change the public IP into a private so is still the same
>>>>>>> issue, At the beginning I thought it was an IP problem for security and I
>>>>>>> tested before but nothing changed. So here is the conf with private IP as I
>>>>>>> have right know.
>>>>>>> *** General ***
>>>>>>>
>>>>>>> owner = Jade Fox
>>>>>>> contact = Fox at mail.cr
>>>>>>> mailhost = mx.mail.cr
>>>>>>> # NOTE: do not put the Image Cache below cgi-bin
>>>>>>> # since all files under cgi-bin will be executed ... this is not
>>>>>>> # good for images.
>>>>>>> cgiurl = http://192.168.1.200/smokeping.cgi
>>>>>>> # specify this to get syslog logging
>>>>>>> syslogfacility = local0
>>>>>>> # each probe is now run in its own process
>>>>>>> # disable this to revert to the old behaviour
>>>>>>> # concurrentprobes = no
>>>>>>>
>>>>>>> @include /etc/smokeping/config.d/pathnames
>>>>>>>
>>>>>>> Regarding the other suggestion, I have this files:
>>>>>>> root at Fox:/etc/smokeping/config.d# ls
>>>>>>> Alerts General Presentation sendmail Targets
>>>>>>> Database pathnames Probes Slaves
>>>>>>>
>>>>>>> In alerts I have values from smokeping webpage:
>>>>>>>
>>>>>>> +someloss
>>>>>>> type = loss
>>>>>>> # in percent
>>>>>>> pattern = >0%,*12*,>0%,*12*,>0%
>>>>>>> comment = loss 3 times in a row
>>>>>>>
>>>>>>> +lossdetect
>>>>>>> type = loss
>>>>>>> # in percent
>>>>>>> pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
>>>>>>> comment = suddenly there is packet loss
>>>>>>>
>>>>>>> +miniloss
>>>>>>> type = loss
>>>>>>> # in percent
>>>>>>> pattern = >0%,*12*,>0%,*12*,>0%
>>>>>>> comment = detected loss 3 times over the last two hours
>>>>>>>
>>>>>>> +rttdetect
>>>>>>> type = rtt
>>>>>>> # in milliseconds
>>>>>>> pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
>>>>>>> comment = routing messed up again ?
>>>>>>>
>>>>>>> +rttbadstart
>>>>>>> type = rtt
>>>>>>> # in milliseconds
>>>>>>> pattern = ==S,==U
>>>>>>> comment = offline at startup
>>>>>>>
>>>>>>> In targets :
>>>>>>>
>>>>>>> *** Targets ***
>>>>>>>
>>>>>>> probe = FPing
>>>>>>> menu = Top
>>>>>>> title = Network Latency Grapher
>>>>>>> remark = Welcome to the SmokePing website of xxx Company. \
>>>>>>> Here you will learn all about the latency of our network.
>>>>>>>
>>>>>>> + Luminet
>>>>>>>
>>>>>>> menu = Luminet
>>>>>>> title = Local Network
>>>>>>> alerts = someloss
>>>>>>>
>>>>>>> ++ LocalMachine
>>>>>>>
>>>>>>> menu = Local Machine
>>>>>>> title = This host
>>>>>>> host = localhost
>>>>>>> alerts = someloss
>>>>>>>
>>>>>>> + Colom
>>>>>>> menu = Colom
>>>>>>> title = Colom
>>>>>>>
>>>>>>> ++Colom
>>>>>>> title = ICMP Colom
>>>>>>> host = 192.168.1.101
>>>>>>> alerts = someloss
>>>>>>>
>>>>>>> in Probes:
>>>>>>> +FPing
>>>>>>>
>>>>>>> binary = /usr/bin/fping
>>>>>>>
>>>>>>> And that's all I have configured.
>>>>>>> Regards
>>>>>>>
>>>>>>>
>>>>>>> 2014-03-11 19:09 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>
>>>>>>> There is little help I can provide if you don't share all your
>>>>>>>> config.
>>>>>>>> You say that you replaced the values yet in the config you shared I
>>>>>>>> see:
>>>>>>>>
>>>>>>>> cgiurl = http://my.domain/smokeping.cgi
>>>>>>>>
>>>>>>>> and also, that's not the only config file you need to work on, you
>>>>>>>> also need to look in the files in /etc/smokeping/conf.d
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Mar 11, 2014 at 12:06 PM, Erlington Cardoza <
>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Yes, I replace the values in this email for security because it
>>>>>>>>> has a public IP, if not I couldn`t see that my graph has not data...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2014-03-11 19:03 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>>>
>>>>>>>>> But you need to replace your cgiurl value, is your "my.domain"
>>>>>>>>>> really your domain? you need to know at least the ip of your server.
>>>>>>>>>> Do you know the ip of it?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Mar 11, 2014 at 11:56 AM, Erlington Cardoza <
>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Yeah sorry for my lost, in that guide the config file has the
>>>>>>>>>>> same configuration of my General file I showed you before.
>>>>>>>>>>> /etc/smokeping/config.d/General:
>>>>>>>>>>>
>>>>>>>>>>> *** General ***
>>>>>>>>>>>
>>>>>>>>>>> owner = my owner
>>>>>>>>>>> contact = owner at mail.com
>>>>>>>>>>> mailhost = mx.mail.com
>>>>>>>>>>> # NOTE: do not put the Image Cache below cgi-bin
>>>>>>>>>>> # since all files under cgi-bin will be executed ... this is not
>>>>>>>>>>> # good for images.
>>>>>>>>>>> cgiurl = http://my.domain/smokeping.cgi
>>>>>>>>>>> # specify this to get syslog logging
>>>>>>>>>>> syslogfacility = local0
>>>>>>>>>>> # each probe is now run in its own process
>>>>>>>>>>> # disable this to revert to the old behaviour
>>>>>>>>>>> # concurrentprobes = no
>>>>>>>>>>>
>>>>>>>>>>> @include /etc/smokeping/config.d/pathnames
>>>>>>>>>>>
>>>>>>>>>>> I guess it is an older version of smokeping.
>>>>>>>>>>> Regards
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2014-03-11 18:47 GMT+01:00 Kwame Bahena <informatux at gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>> So you are really lost.
>>>>>>>>>>>> Follow a howto like this
>>>>>>>>>>>> http://www.howtoforge.com/monitoring_network_latency_smokeping_debian_etch
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:44 AM, Erlington Cardoza <
>>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I`m sorry in the guide I followed it just said type "sudo
>>>>>>>>>>>>> apt-get install smokeping". I searched that config file with "find" and I
>>>>>>>>>>>>> found this one: /etc/smokeping/config, and it has this config:
>>>>>>>>>>>>>
>>>>>>>>>>>>> @include /etc/smokeping/config.d/General
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Alerts
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Database
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Presentation
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Probes
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Slaves
>>>>>>>>>>>>> @include /etc/smokeping/config.d/Targets
>>>>>>>>>>>>>
>>>>>>>>>>>>> is that what you`re talking about?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2014-03-11 18:34 GMT+01:00 Kwame Bahena <informatux at gmail.com>
>>>>>>>>>>>>> :
>>>>>>>>>>>>>
>>>>>>>>>>>>> The smokeping config file. Do you know where is it?
>>>>>>>>>>>>>> Did you follow a howto to install and configure it?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Kwame
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:33 AM, Erlington Cardoza <
>>>>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Which configuration do you need? smokeping conf or Debian?.
>>>>>>>>>>>>>>> Which command I need to use?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2014-03-11 18:31 GMT+01:00 Kwame Bahena <
>>>>>>>>>>>>>>> informatux at gmail.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You have an error on your config file.
>>>>>>>>>>>>>>>> The error says that the file or directory /etc/config does
>>>>>>>>>>>>>>>> not exist.
>>>>>>>>>>>>>>>> Can you pastebin your config some place and share it?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Kwame
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:27 AM, Erlington Cardoza <
>>>>>>>>>>>>>>>> erlington.j at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hey guys, first of all, thanks to oetiker for this
>>>>>>>>>>>>>>>>> excellent tool.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Second, I have done the command ( smoke --debug ) and my
>>>>>>>>>>>>>>>>> smokeping says "ERROR: loading smokeping configuration
>>>>>>>>>>>>>>>>> file /usr/sbin/../etc/config: No such file or directory".
>>>>>>>>>>>>>>>>> I am using Debian but I am not a master in this O.S by the way. Also, my
>>>>>>>>>>>>>>>>> local machine does graphics with data but my other host does not appear the
>>>>>>>>>>>>>>>>> data. In my desesperation I did assigned all of possible permissions to the
>>>>>>>>>>>>>>>>> other host, like this "-rwx-rwx-rwx 1 smokeping www-data" and I still dont
>>>>>>>>>>>>>>>>> have data in the new graphic, but in the local machine I do have and Im not
>>>>>>>>>>>>>>>>> using master-slave configuration. What can I do?.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks and Regards
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> smokeping-users mailing list
>>>>>>>>>>>>>>>>> smokeping-users at lists.oetiker.ch
>>>>>>>>>>>>>>>>> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20140311/6a43da55/attachment-0001.htm
More information about the smokeping-users
mailing list