[mrtg] Re: MRTG Graph Size?

Starkweather, Mike mike.starkweather at anheuser-busch.com
Thu Jul 15 17:41:28 MEST 1999


Clint,

Make sure that you do NOT have the Unscaled[]: option specified.  Without
Unscaled the graphs should autoscale to just show the actual data range (more or
less).

Mike Starkweather
MIS Consultant
314.577.3701
mike.starkweather at anheuser-busch.com


> -----Original Message-----
> From:	Clint Alexander [SMTP:Clint.Alexander at corp.ptd.net]
> Sent:	Thursday, July 15, 1999 10:06 AM
> To:	'MRTG List'
> Subject:	[mrtg] MRTG Graph Size?
> 
> Hello MRTG users.
>  
> I have a small problem I'm trying to figure out.
>  
> Ok, here's the scenario.
>  
> I have a network of roughly 88  Routers & Atm devices. 
> I run MRTG on a SunOS 5.7 every 5 minutes.
>  
> Taking one Ethernet port on one Router as an example,
> The daily graph shows the averages between 0.0M - 10.0M .
> Now, suppose this Router only peaks at 420.0K ?
> The daily graph only shows a blue line running across
> the bottom because it hasn't used anything over 420.0K.
> The weekly graph shows averages between 0.0K - 560.0K.
> This graph of course shows me more detail.
> Is there a way ( that will be Router/port usage dependant ) that I 
> can rescale the Daily graph, so I can see actual detailed usage and
> not an average between 0.0M - 10.0M ?
>  
> I hope this was clear. :)
> I am by no means a great Perl programmer.. but I can fumble
> through the code, and figure things out.
> 
> ------------------------------------------- 
> Clint Alexander 
> clinta at corp.ptd.net 
> PenTeleData Engineering Dept. 
> 
> [- Over-Estimate everything, and nothing will surprise you -] 
>                                                                             
>              -HV 
> 
>  
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


More information about the mrtg mailing list