[mrtg] Re: MRTG and Cabletron SSR 16

[Stanley, Peter T]

> 
> Does anyone out there know how to count the physical ports on 
> a Cabletron
> SSR 16?
> 

I got the following answer from one of the mib pros here at 
ctron:

Use getnext on ifXTable's ifConnectorPresent == TRUE. rfc 2233.

Or, use ctron-ssr-hardware mib and walk the sysHwPortTable.

-Peter

> -----Original Message-----
> From: Ted_Rule at flextech.co.uk [mailto:Ted_Rule at flextech.co.uk]
> Sent: Wednesday, October 06, 1999 1:33 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: MRTG and Cabletron SSR 16
> 
> 
> 
> 
> Looks to me like the box counts all the physical interfaces 
> first, and then adds
> a whole bundle
> more corresponding to the VLANs....
> 
> This is a walk from one of our SSR-2-B's with 16 x 100M ports 
> and several VLAN's
> and Trunks
> and stuff.
> 
> Probably means you have to review the MRTG setup if you 
> adjust the VLAN
> configurations.
> 
> I've avoided that issue by always using the physical port ifIndex....
> 
> I think you'll find the ifDescr field is pretty descriptive....
> 
> Ted
> 
> [itadmin at intranot itadmin]$ snmpwalk fttv-gps-core-ssrA 
> public interfaces |more

> 
> 
> 
> "Jeffrey Osborne's Lists" <lists at nsipo.arc.nasa.gov> on 
> 05/10/99 21:40:37
> 
> To:   mrtg at list.ee.ethz.ch
> cc:    (bcc: Ted Rule/160GPS/Flextech/UK)
> 
> Subject:  [mrtg] MRTG and Cabletron SSR 16
> 
> 
> 
> Does anyone out there know how to count the physical ports on 
> a Cabletron
> SSR 16?
> 
> 
> 
> 
> --
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg