October 1999 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Oct 1 00:51:31 MEST 1999
Ending: Sun Oct 31 16:24:01 MET 1999
Messages: 578

• [mrtg] Re: One more question..   George D. Nincehelser
• [mrtg] Re: One more question..   Chairman of the Bored
• [mrtg] Mibs   Jeffrey Osborne's Lists
• [mrtg] Re: Mibs   Armen S. Minassian
• [mrtg] printing graphs   Jeffrey Osborne's Lists
• [mrtg] Re: stats went to hell :/   Chairman of the Bored
• [mrtg] Interface Monitoring of Cisco Routers   hakim at corp.thrunet.com
• [mrtg] Cisco 2501 config file   Nicolai Hansen
• [mrtg] Locale in MRTG 2.8.8   Albert Mamanov
• [mrtg] Re: One more question..   Alex van den Bogaerdt
• [mrtg] Collisions   Frantsen Christian
• [mrtg] Cisco get clock time via SNMP   MOSCATO Giampiero
• [mrtg] Re: Collisions   Lionel Billiet
• [mrtg] Re: Collisions   Alex van den Bogaerdt
• [mrtg] Re: Collisions   Lionel Billiet
• [mrtg] 1 minute SNMP, 5-10 minute html/gif refresh   Archer, Kyle
• [mrtg] Re: Locale in MRTG 2.8.8   Morten S. Nielsen
• [mrtg] Re: 1 minute SNMP, 5-10 minute html/gif refresh   Stieers, Ken
• [mrtg] Re: Mibs   Stieers, Ken
• [mrtg] Not strictly MRTG, but.....   Paul Nelson
• [mrtg] Re: Not strictly MRTG, but.....   Stieers, Ken
• [mrtg] problems monitoring squid   Pieter Kooistra
• [mrtg] PM3Lines and sessions   Nicolai Hansen
• [mrtg] rateup died   Harald Pfaender
• [mrtg] Re: Cisco get clock time via SNMP   Jeffrey Osborne's Lists
• [mrtg] Re: Collisions   Larry Sheldon
• [mrtg] Re: rateup died   Jeffrey Osborne's Lists
• [mrtg] R: Cisco get clock time via SNMP   MOSCATO Giampiero
• [mrtg] Graphing one value.   Mitch Vincent
• [mrtg] Re: Graphing one value.   Stieers, Ken
• [mrtg] Re: Collisions   Matt Wibby
• [mrtg] Re: problems monitoring squid   Morten S. Nielsen
• [mrtg] Re: Collisions --> device needs RMON Mib --> RFC 1757   Stanley, Peter T
• [mrtg] Re: Collisions --> device needs RMON Mib --> RFC 1757   Neil Calvert
• [mrtg] Re: One more question..   Rick Horowitz
• [mrtg] Re: Graphing one value.   Jacek Zabicki
• [mrtg] MRTG is not updating the logfile.   Mike Kalscheuer
• [mrtg] mrtg vs. Linux   Eric Seppanen
• [mrtg] Re: MRTG is not updating the logfile.   David C Prall
• [mrtg] apc ups?   Chairman of the Bored
• [mrtg] Interface Descriptors   Dave
• [mrtg] Re: printing graphs   Christian Terek
• [mrtg] Re: gd-1.6.3 and libz   Yozo Toda
• [mrtg] Re: apc ups?   Jon Miner
• [mrtg] Re: mrtg vs. Linux   Neil Calvert
• [mrtg] Need Help with Mibs   Evan Touchett
• [mrtg] problem with cpumon.pl   0livier Daury
• [mrtg] Re: apc ups?   Tim Kennedy
• [mrtg] NT4 SP5 German   Philipp Kunz
• [mrtg] Re: problems monitoring squid   Pieter Kooistra
• [mrtg] Re: apc ups?   Ted_Rule at flextech.co.uk
• [mrtg] Re: NT4 SP5 German   Morten S. Nielsen
• [mrtg] Help monitoring CISCO 16xx&25xx CPU load.   Sergei Batakov
• [mrtg] Percentage calculation   Lionel Billiet
• [mrtg] Re: Need Help with Mibs   Stieers, Ken
• [mrtg] Re: Need Help with Mibs   David C Prall
• [mrtg] thanks   Paul Nelson
• [mrtg] Howto determine MRTG version   van Engelen, Maurice
• [mrtg] Re: problems monitoring squid   Morten S. Nielsen
• [mrtg] Q's from a group newbie.   LaurieSR at clf.navy.mil
• [mrtg] cisco switch monitoring   isp-mail
• [mrtg] Tr: HELP : Monitoring PIX with MRTG   Fabien Lebargy
• [mrtg] What OID is allways 0 ?   Jacek Zabicki
• [mrtg] Re: What OID is allways 0 ?   David C Prall
• [mrtg] OID numbers   Payman N
• [mrtg] Re: 1 minute SNMP, 5-10 minute html/gif refresh   Rick Horowitz
• [mrtg] .cmd file angst   Chairman of the Bored
• [mrtg] Re: .cmd file angst   David C Prall
• [mrtg] Re: .cmd file angst   Christian Terek
• [mrtg] SV: .cmd file angst   Jesper Tim Jacobsen
• [mrtg] Re: What OID is allways 0 ?   Larry Sheldon
• [mrtg] Re: SV: .cmd file angst   Chairman of the Bored
• [mrtg] Max4k user tracking problem   Rene van Dijk
• [mrtg] Re: Max4k user tracking problem   Jeff Murphy
• [mrtg] Re: What OID is allways 0 ?   Alex van den Bogaerdt
• [mrtg] Re: .cmd file angst   Christian Terek
• [mrtg] Re: What OID is allways 0 ?   Alex van den Bogaerdt
• [mrtg] Math problem: so\um is not equal to the parts   Rod Oliver
• [mrtg] Threshold info   Matt Connley
• [mrtg] Re: Math problem: so\um is not equal to the parts   Henry Steinhauer
• [mrtg] Re: .cmd file angst   Stieers, Ken
• [mrtg] summary: problems monitoring squid   Pieter Kooistra
• [mrtg] configfile for 3COM 9000   Pieter Kooistra
• [mrtg] Re: Threshold info   David C Prall
• [mrtg] monitoring Sun   Jean-Francois Relativo
• [mrtg] Printer PageCounts   Lionel Billiet
• [mrtg] Re: Printer PageCounts   Ted_Rule at flextech.co.uk
• [mrtg] Re: Printer PageCounts   Jacek Zabicki
• [mrtg] difference between Sun and Cisco   Olivier Gontier
• [mrtg] Graph output when node is down?   Mike Handley
• [mrtg] Re: Graph output when node is down?   Matt Connley
• [mrtg] Re: Graph output when node is down?   Neil Calvert
• [mrtg] Re: Graph output when node is down?   Stieers, Ken
• [mrtg] Re: Graph output when node is down?   Pieter Kooistra
• [mrtg] Re: Graph output when node is down?   Mike Handley
• [mrtg] Re: difference between Sun and Cisco   Scudamore, Mike
• [mrtg] Re: Printer PageCounts   Shawn Barnhart
• [mrtg] Re: Printer PageCounts   Mark Hendricks
• [mrtg] Re: Printer PageCounts   Mark Hendricks
• [mrtg] Values less than 1   Nail, Thomas
• [mrtg] Re: Values less than 1   Alex van den Bogaerdt
• [mrtg] RRDTOOL?   Chairman of the Bored
• [mrtg] Monitoring via MAC as opposed to IP   Jamie Norwood
• [mrtg] Re: Monitoring via MAC as opposed to IP   Larry Sheldon
• [mrtg] Re: RRDTOOL?   Chairman of the Bored
• [mrtg] Re: RRDTOOL?   Alex van den Bogaerdt
• [mrtg] Problem with MRTG on NT   Francois.Fouchet at exane.com
• [mrtg] MRTG and Cabletron SSR 16   Jeffrey Osborne's Lists
• [mrtg] checking for gdImageGif in -lgd... no   Michael Stout
• [mrtg] How to Monitor Ascend Maxes   Greg Gaiters
• [mrtg] Help... log file question....   lfiddler at us.ibm.com
• [mrtg] Re: Help... log file question....   Zaid Ali
• [mrtg] Re: Help... log file question....   Alex van den Bogaerdt
• [mrtg] --vendor flag   Aguet Pierre
• [mrtg] Re: MRTG and Cabletron SSR 16   Ted_Rule at flextech.co.uk
• [mrtg] Re: Help... log file question....   Steffen Kluge
• [mrtg] Re: difference between Sun and Cisco   Olivier Gontier
• [mrtg] Re: Help... log file question....   Stieers, Ken
• [mrtg] monitoring ethernet card   Zsolt Kozak
• [mrtg] Can mrtg just read from file instead of SNMP?   Clint Alexander
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Stieers, Ken
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Clint Alexander
• [mrtg] Re: Total switch bandwidth   Stieers, Ken
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Clint Alexander
• [mrtg] Total switch bandwidth   flec at flec.co.uk
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Clint Alexander
• [mrtg] SNMP Temp devices   griner at susq.com
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Stieers, Ken
• [mrtg] Operations ?   Lionel Billiet
• [mrtg] Can't seem to get MRTG 2.8.8 to produce PNG   Brian Hughes
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Leonardo Rodrigues
• [mrtg] Re: Total switch bandwidth   flec at shellnet.co.uk
• [mrtg] Re: SNMP Temp devices   Stieers, Ken
• [mrtg] Re: Problem with MRTG on NT   David C Prall
• [mrtg] Re: Total switch bandwidth   Andres Tong
• [mrtg] Re: Math problem: sum is not equal to the parts   Rod Oliver
• [mrtg] libgd.so.0 not found? :(   root
• [mrtg] Conversion : "Cells" to "Bits" ??   Javier Tan
• [mrtg] SUSE 6.2 and cmu-snmp for Linux v3.7; Jul 1999   kkor at gmx.de
• [mrtg] Re: Total switch bandwidth   Steven Fletcher
• [mrtg] Re: Conversion : "Cells" to "Bits" ??   Stieers, Ken
• [mrtg] Re: Total switch bandwidth   Stieers, Ken
• [mrtg] Re: SNMP Temp devices   Tim Kennedy
• [mrtg] Cisco operating system Version   Giancarlo Tirado V.
• [mrtg] Re: Total switch bandwidth   Steven Fletcher
• [mrtg] Re: SNMP Temp devices   Bob Dozier
• [mrtg] Re: Total switch bandwidth   Alex van den Bogaerdt
• [mrtg] GetIf Documentation   Neil Calvert
• [mrtg] Re: GetIf Documentation   Stieers, Ken
• [mrtg] Re: GetIf Documentation   Matt Connley
• [mrtg] Re: GetIf Documentation   Chairman of the Bored
• [mrtg] Re: GetIf Documentation   Stieers, Ken
• [mrtg] Question on In & Out Stats   Isaac
• [mrtg] ANNOUNCE: Newsgroup for MRTG/RRDtool/Cricket/Orca/NRG   Tobias Oetiker
• [mrtg] Re: Question on In & Out Stats   Christopher E. Brown
• [mrtg] Re: Question on In & Out Stats   Chairman of the Bored
• [mrtg] Re: Question on In & Out Stats   Bradford Woodcock
• [mrtg] Re: Question on In & Out Stats   Alex van den Bogaerdt
• [mrtg] MRTG not passing data on to RRDTool?   Chris Josephes
• [mrtg] Re: Question on In & Out Stats   Larry Sheldon
• [mrtg] Snmpwalk 2511?   Roddy Strachan
• [mrtg] first subid to big   Fre de Vries
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Stieers, Ken
• [mrtg] Re: Question on In & Out Stats   Stieers, Ken
• [mrtg] Re: Can't seem to get MRTG 2.8.8 to produce PNG   Steve Rothanburg
• [mrtg] Re: Operations ?   Jacek Zabicki
• [mrtg] Re: Can't seem to get MRTG 2.8.8 to produce PNG   Chris Josephes
• [mrtg] IconDir option   Lionel Billiet
• [mrtg] Re: Can't seem to get MRTG 2.8.8 to produce PNG   Brian Hughes
• [mrtg] Re: IconDir option   Stieers, Ken
• [mrtg] any documentation for reading MIB ?   Payman N
• [mrtg] Re: Operations ?   Chairman of the Bored
• [mrtg] Re: any documentation for reading MIB ?   Stieers, Ken
• [mrtg] Parsing Web Server Logs   David Gabler
• [mrtg] ATM monitoring on Xylan switches   lfiddler at us.ibm.com
• [mrtg] ATM monitoring on Xylan switches   lfiddler at us.ibm.com
• [mrtg] Re: MRTG and Cabletron SSR 16   Stanley, Peter T
• [mrtg] ATM monitoring on Xylan switches   lfiddler at us.ibm.com
• [mrtg] Re: Can mrtg just read from file instead of SNMP?   Alex van den Bogaerdt
• [mrtg] Re: ATM monitoring on Xylan switches   Eric S. Johnson
• [mrtg] Re: Operations ?   Jacek Zabicki
• [mrtg] Re: --vendor flag   Tim Schuh
• [mrtg] Mrtg-ping-probe on NT   Meisner, Jeff D
• [mrtg] Re: Total switch bandwidth   David C Prall
• [mrtg] a little bit of help! :)   Marc-Adrian Napoli
• [mrtg] Re: a little bit of help! :)   Larry Sheldon
• [mrtg] Re: a little bit of help! :)   Alex van den Bogaerdt
• [mrtg] Re: Parsing Web Server Logs   Jon Miner
• [mrtg] Using sub-interfaces   Marcel Lemmen
• [mrtg] Problem reading specific OID   Robert Knotek
• [mrtg] 'Make' Error   Mohammed, Hadiza L
• [mrtg] Re: 'Make' Error   Steven Bonneville
• [mrtg] Re: 'Make' Error   Mohammed, Hadiza L
• [mrtg] Re: Problem reading specific OID   Chairman of the Bored
• [mrtg] Re: Problem reading specific OID   Robert Knotek
• [mrtg] Re: Problem reading specific OID   Chairman of the Bored
• [mrtg] calculate_traffic.pl   Charles Burton
• [mrtg] Re: Problem reading specific OID   Robert Knotek
• [mrtg] Problems monitoring Cisco Local Director   Frank Smith
• [mrtg] using mrtg with float values   koen breugelmans
• [mrtg] snmp timeout problem...   Anthony Hinsinger
• [mrtg] Re: snmp timeout problem...   Jon Miner
• [mrtg] Re: Problem reading specific OID   Alex van den Bogaerdt
• [mrtg] Access Builder problems.   AWorley at stmarygj.com
• [mrtg] AIX Enterprise MIB   Rick Horowitz
• [mrtg] Re: Access Builder problems.   Alex van den Bogaerdt
• [mrtg] Re: Access Builder problems.   Chairman of the Bored
• [mrtg] I have 0 in my average why?   Marco Antonio Mejía Lara
• [mrtg] Re: 'Make' Error   Yozo Toda
• [mrtg] Re: calculate_traffic.pl   Morten S. Nielsen
• [mrtg] QUERY   kbashir at engro.com
• [mrtg] Re: Access Builder problems.   AWorley at stmarygj.com
• [mrtg] Re: Access Builder problems.   AWorley at stmarygj.com
• [mrtg] Re: QUERY   Larry Sheldon
• [mrtg] Re: 'Make' Error   Tim Kennedy
• [mrtg] Re: 'Make' Error   Tim Kennedy
• [mrtg] My average is 0%, why?   Marco Antonio Mejía Lara
• [mrtg] Reading OId   Jacek Zabicki
• [mrtg] Re: 'Make' Error   Mohammed, Hadiza L
• [mrtg] Stupidity question   Clint Alexander
• [mrtg] Re: Stupidity question   Bradford Woodcock
• [mrtg] ./configure error mrtg-2.8.8   BETA ONE
• [mrtg] Re: Stupidity question   Clint Alexander
• [mrtg] Re: Stupidity question   Clint Alexander
• [mrtg] (no subject)   Marc Lévesque
• [mrtg] Subinternfaces   Marc Lévesque
• [mrtg] Re: ./configure error mrtg-2.8.8   Brian Hughes
• [mrtg] Re: ./configure error mrtg-2.8.8   BETA ONE
• [mrtg] Re: ./configure error mrtg-2.8.8   Mohammed, Hadiza L
• [mrtg] Re: ./configure error mrtg-2.8.8   Brian Hughes
• [mrtg] Re: ./configure error mrtg-2.8.8   BETA ONE
• [mrtg] Another question.   Marc-Adrian Napoli
• [mrtg] Re: Another question.   Larry Sheldon
• [mrtg] Re: MRTG and y2k compliant   Tobias Oetiker
• [mrtg] defining criteria   CHARL VORSTER
• [mrtg] Re: Problem reading specific OID   Robert Knotek
• [mrtg] Re: Problem reading specific OID   Robert Knotek
• [mrtg] MRTG executable error at line 56   System
• [mrtg] Re: MRTG executable error at line 56   Meade Horne
• [mrtg] HELP with SNMP?!   BETA ONE
• [mrtg] multiple configs   Nail, Thomas
• [mrtg] Re: MRTG executable error at line 56   System
• [mrtg] Re: multiple configs   Jacek Zabicki
• [mrtg] Re: multiple configs   Neil Calvert
• [mrtg] Re: multiple configs   David Gabler
• [mrtg] Wrong time displayed in graph   Jac Fagundo
• [mrtg] Re: multiple configs   Chris Josephes
• [mrtg] Re: multiple configs   Alex van den Bogaerdt
• [mrtg] Re: Wrong time displayed in graph   David C Prall
• [mrtg] Re: Wrong time displayed in graph   Graeme Fowler
• [mrtg] Re: Wrong time displayed in graph   Neil Calvert
• [mrtg] help creating "mrtg.cfg" file ?   BETA ONE
• [mrtg] [Newbie]: Text, but no graphs   Joe Loiacono
• [mrtg] Re: [Newbie]: Text, but no graphs   Alex van den Bogaerdt
• [mrtg] Re: help creating "mrtg.cfg" file ?   Jacek Zabicki
• [mrtg] Re: help creating "mrtg.cfg" file ?   BETA ONE
• [mrtg] Re: multiple configs   ³¯«Ø§»
• [mrtg] Re: help creating "mrtg.cfg" file ?   George D. Nincehelser
• [mrtg] MRTG: Digital UNIX OID for Memory and Swap usage   KEMAL OZCAN (IT-TMO)
• [mrtg] Shiva Lanrover   Phil Loper
• [mrtg] a question   Payman N
• [mrtg] Re: [Newbie]: Text, but no graphs   Joe Loiacono
• [mrtg] Re: a question   Stieers, Ken
• [mrtg] OID value for memory load   Nurdan Civi
• [mrtg] Re: Shiva Lanrover   Henry Steinhauer
• [mrtg] MRTG problems under NT4 SP5   Adam Meixler
• [mrtg] mrtg <--> packets per second   Dan Larsson
• [mrtg] Re: Shiva Lanrover   KOCH François Athesa
• [mrtg] Re: MRTG problems under NT4 SP5   Chris Josephes
• [mrtg] Re: Shiva Lanrover   Phil Loper
• [mrtg] Re: Shiva Lanrover   Chairman of the Bored
• [mrtg] Re: mrtg polling frequency   Jie Zhang
• [mrtg] Problem with configure MRTG   David Hughes
• [mrtg] Re: Error on Line 56   Andrew M TOWNSEND
• [mrtg] OIDs for HP ProCurve 4000M ?   Jim Jones, Jr.
• [mrtg] Re: OIDs for HP ProCurve 4000M ?   Jim Jones, Jr.
• [mrtg] Re: a question   Steffen Kluge
• [mrtg] two different graphs on one html page   Dan Larsson
• [mrtg] empty log-file   Rainer_Mayr at mn.man.de
• [mrtg] Re: two different graphs on one html page   Stieers, Ken
• [mrtg] snmpget linux command and Cisco router   kikino su sardu
• [mrtg] Re: Shiva Lanrover   KOCH François Athesa
• [mrtg] R: Re: Shiva Lanrover   Deflorio Angelo
• [mrtg] getif 2.2   paul.zahalan
• [mrtg] Re: getif 2.2   David C Prall
• [mrtg] Re: MRTG problems under NT4 SP5   Robin Burger
• [mrtg] Re: getif 2.2   Stieers, Ken
• [mrtg] Re: getif 2.2   paul.zahalan
• [mrtg] Re: Shiva Lanrover   KOCH François Athesa
• [mrtg] Re: R: Shiva Lanrover   Phil Loper
• [mrtg] getif.2.2.exe   paul.zahalan
• [mrtg] Exchange Server   Jose Manuel
• [mrtg] Re: Shiva Lanrover   Phil Loper
• [mrtg] New Question - PM3 & MRTG   John Lange
• [mrtg] Re: Exchange Server   David C Prall
• [mrtg] Re: help creating "mrtg.cfg" file ?   Jacek Zabicki
• [mrtg] Re: snmpget linux command and Cisco router   Tim Kennedy
• [mrtg] Re: Shiva Lanrover   Henry Steinhauer
• [mrtg] Does anyone have a 'clue' on what I need to do to get the Processor Load to graph out?   Robin Burger
• [mrtg] Re: snmpget linux command and Cisco router   Martin Ansdell-Smith
• [mrtg] Re: Does anyone have a 'clue' on what I need to do to get the ProcessorLoad to graph out?   Joey Officer
• [mrtg] Re: snmpget linux command and Cisco router   Tim Schuh
• [mrtg] Monitoring Windows 9X clients   Leonardo Rodrigues
• [mrtg] R: Re: R: Shiva Lanrover   Deflorio Angelo
• [mrtg] graphs just go up and up.   Dan Larsson
• [mrtg] MRTG scaling and performace issues ?   Aivo Kalu
• [mrtg] Re: Does anyone have a 'clue' on what I need to do to get the ProcessorLoad to graph out?   Neil Calvert
• [mrtg] Re: graphs just go up and up.   Jacek Zabicki
• [mrtg] MRTG read values units   Alexander Fichman
• [mrtg] Re: snmpget linux command and Cisco router   Tim Kennedy
• [mrtg] Cisco Catalyst 5500 Switch Mibs   Landa, Brian
• [mrtg] Re: MRTG read values units   Eggsie21 at aol.com
• [mrtg] using operands   Eggsie21 at aol.com
• [mrtg] prefixes   Dan Larsson
• [mrtg] Re: using operands   Stieers, Ken
• [mrtg] Re: prefixes   David C Prall
• [mrtg] Re: Monitoring Windows 9X clients   David C Prall
• [mrtg] Re: MRTG scaling and performace issues ?   David C Prall
• [mrtg] Re: Cisco Catalyst 5500 Switch Mibs   David C Prall
• [mrtg] How to get the line error rate?   Meena Chockalingam
• [mrtg] Re: using operands   Larry Sheldon
• [mrtg] snmp question?   BETA ONE
• [mrtg] Re: Monitoring Windows 9X clients   Christian Terek
• [mrtg] Re: snmp question?   David C Prall
• [mrtg] Re: MRTG scaling and performace issues ?   David C Prall
• [mrtg] Re: Monitoring Windows 9X clients   David C Prall
• [mrtg] Re: MRTG scaling and performace issues ?   Aivo Kalu
• [mrtg] Re: snmpget linux command and Cisco router   kikino su sardu
• [mrtg] [Fwd: CPU]   Robert Maras
• [mrtg] MRTG & AIX 4.2   Phil Loper
• [mrtg] OID math in MRTG   Emery, Mark
• [mrtg] Re: How to get the line error rate?   Meena Chockalingam
• [mrtg] How to Install MIB on NT   Phil Loper
• [mrtg] Re: How to Install MIB on NT   Stieers, Ken
• [mrtg] Re: snmpget linux command and Cisco router   Tim Schuh
• [mrtg] Re: MRTG & AIX 4.2   Rick Horowitz
• [mrtg] SAR and MRTG   Jay Orr
• [mrtg] Re: SAR and MRTG   Chris Josephes
• [mrtg] Returned values being rolling over, clipped or something   Rod Oliver
• [mrtg] Yet another OID question...   lfiddler at us.ibm.com
• [mrtg] Yet another OID question...   lfiddler at us.ibm.com
• [mrtg] Where to get RDDTOOL?   Huy Vo
• [mrtg] Re: Returned values being rolling over, clipped or something   Tim Schuh
• [mrtg] Re: Where to get RDDTOOL?   Adrian J Bool
• [mrtg] Re: Returned values being rolling over, clipped or something   Alex van den Bogaerdt
• [mrtg] Newbie question   Fernando Barajas
• [mrtg] [mrtg]Re:Newbie question   Nail, Thomas
• [mrtg] Re: [mrtg]Newbie question   Fernando Barajas
• [mrtg] Re: Returned values being rolling over, clipped or something   Andrew Cook
• [mrtg] Re: Yet another OID question...   David C Prall
• [mrtg] Traffic monitoring.   Marc-Adrian Napoli
• [mrtg] Another one :)   Marc-Adrian Napoli
• [mrtg] Mrtg Cisco Voice QUESTIONS   Pentony, Alan
• [mrtg] Netscape Proxy Server   Ernesto Hernández Erenas
• [mrtg] Re: Another one :)   Stieers, Ken
• [mrtg] mrtg-2.8.8 with use RRDTool and maxBytes   Matija Grabnar
• [mrtg] cpu usage output (snmp)   Dan Larsson
• [mrtg] Threshold Checking   SCHAAF PETER
• [mrtg] Re: Threshold Checking   David C Prall
• [mrtg] mrtg-2.8.8 with use RRDTool   Scott Shipley
• [mrtg] Re: Returned values being rolling over, clipped or something   Neil Calvert
• [mrtg] Re: mrtg-2.8.8 with use RRDTool   Matija Grabnar
• [mrtg] Re: [mrtg]Newbie question   Nail, Thomas
• [mrtg] Re: OID math in MRTG   Jacek Zabicki
• [mrtg] problems with mrtg2.8.8 on solaris 7 ultra 10 system   Ian Stong
• [mrtg] OIDS/cisco frame subinterface multipoint   R. Brockway
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   Stieers, Ken
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   R. Brockway
• [mrtg] Re: Threshold Checking   SCHAAF PETER
• [mrtg] Re: mrtg-2.8.8 with use RRDTool and maxBytes   lists at ripper.informatik.uni-ulm.de
• [mrtg] Re: mrtg-2.8.8 with use RRDTool   lists at ripper.informatik.uni-ulm.de
• [mrtg] Re: Threshold Checking   David C Prall
• [mrtg] MaxBytes1/2 and colors   Sébastien Louyot
• [mrtg] Re: Threshold Checking   SCHAAF PETER
• [mrtg] Re: Threshold Checking   Bradford Woodcock
• [mrtg] Re: Threshold Checking   SCHAAF PETER
• [mrtg] Cisco MIB variable   Giorgio Torassa
• [mrtg] 272 / huge gifs problem continued   DApel at omnipoint.com
• [mrtg] 2.7.2 gifs are now huge for some devices?   DApel at omnipoint.com
• [mrtg] Re: 272 / huge gifs problem continued   Chairman of the Bored
• [mrtg] Old graphs   Chuck.Curto at tmcaz.com
• [mrtg] How do you make MRTG run faster?   Robin Burger
• [mrtg] Re: How do you make MRTG run faster?   Larry Sheldon
• [mrtg] Re: How do you make MRTG run faster?   Jamie Norwood
• [mrtg] Re: Old graphs   David C Prall
• [mrtg] Logging into database   Pete Templin
• [mrtg] MRTG 2.8.8 w/ GDlib 1.7.3   Archer, Kyle
• [mrtg] Re: How do you make MRTG run faster?   Robin Burger
• [mrtg] Re: Old graphs   Chairman of the Bored
• [mrtg] Re: MRTG 2.8.8 w/ GDlib 1.7.3   Yozo Toda
• [mrtg] Re: Old graphs   Larry Sheldon
• [mrtg] Re: How do you make MRTG run faster?   Tim Kennedy
• [mrtg] RESOLVED: 2.7.2 gifs are now huge for some devices?   DApel at omnipoint.com
• [mrtg] empty log file   Rainer_Mayr at mn.man.de
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   CHARL VORSTER
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   Stieers, Ken
• [mrtg] Wrong MIB!!! SNMP Walk Utility for the taking...   Landa, Brian
• [mrtg] Wrong MIB!!! SNMP Walk Utility for the taking...   Landa, Brian
• [mrtg] Setting Max Y variable size   Neil Calvert
• [mrtg] Re: Setting Max Y variable size   Alex van den Bogaerdt
• [mrtg] Help   Landa, Brian
• [mrtg] Re: Help   David C Prall
• [mrtg] Re: Setting Max Y variable size   Jason Hicks
• [mrtg] Re: Setting Max Y variable size   Neil Calvert
• [mrtg] Re: Setting Max Y variable size   Jason Hicks
• [mrtg] Re: problems with mrtg2.8.8 on solaris 7 ultra 10 system   Joe Loiacono
• [mrtg] Re: Wrong MIB!!! SNMP Walk Utility for the taking...   Chairman of the Bored
• [mrtg] Binaries for HP-UX 10.20   COLIN Didier
• [mrtg] platform switch?   Frank Ritchie
• [mrtg] Re: platform switch?   Neil Calvert
• [mrtg] Re: platform switch?   Chairman of the Bored
• [mrtg] Interface Description   Joe Loiacono
• [mrtg] Re: Binaries for HP-UX 10.20   DApel at omnipoint.com
• [mrtg] How do I change the default value of base co-ordinate?   Vu Hai
• [mrtg] OID of login time   Saknon Kangsumrith
• [mrtg] how do I fix the Y axis of the graph ?   Alexander Fichman
• [mrtg] Re: how do I fix the Y axis of the graph ?   Larry Sheldon
• [mrtg] Sunday's Silly NT question   Larry Sheldon
• [mrtg] Re: MRTG read values units   Alexander Fichman
• [mrtg] Re: MRTG read values units   Larry Sheldon
• [mrtg] Re: Sunday's Silly NT question   Stieers, Ken
• [mrtg] Re: OID of login time   David C Prall
• [mrtg] Re: Sunday's Silly NT question   George D. Nincehelser
• [mrtg] Re: Interface Description   David C Prall
• [mrtg] Re: Interface Description   Neil Calvert
• [mrtg] rateup died from Signal 9   Tine Sierink
• [mrtg] get-active2.pl and Windows NT   Jari.Pulkkinen at tietoenator.com
• [mrtg] Re: rateup died from Signal 9   Yozo Toda
• [mrtg] Daily Mb Total Patch   Kelly French
• [mrtg] atmmaker script question ???   BETA ONE
• [mrtg] Re: rateup died from Signal 9   Ian Stong
• [mrtg] Re: rateup died from Signal 9   Joe Loiacono
• [mrtg] Re: Interface Description   Joe Loiacono
• [mrtg] Re: atmmaker script question ???   Mark T. Ganzer
• [mrtg] graphics not showing   Beckie Pack
• [mrtg] Re: get-active2.pl and Windows NT   K Mitchell
• [mrtg] BSD & No Cron   John Lange
• [mrtg] MRTG Core Dump   alain.aube at hrdc-drhc.gc.ca
• [mrtg] Info on FR graphs...   Oyler, Michael
• [mrtg] mrtg config file   John Ter Maat
• [mrtg] Re: mrtg config file   Larry Sheldon
• [mrtg] Re: mrtg config file   Larry Sheldon
• [mrtg] Repeat question...   Marc-Adrian Napoli
• [mrtg] frequency   Justin Shore
• [mrtg] int error   Justin Shore
• [mrtg] External programs with MRTG   Richard Furda
• [mrtg] Re: [Newbie]: Text, but no graph   Arnellos Argyris
• [mrtg] Total Bandwidth utilization   Bambang Budiharto
• [mrtg] Re: Total Bandwidth utilization   David C Prall
• [mrtg] Re: External programs with MRTG   David C Prall
• [mrtg] Re: Repeat question...   David C Prall
• [mrtg] Re: Info on FR graphs...   David C Prall
• [mrtg] Re: Info on FR graphs...   Oyler, Michael
• [mrtg] Perl logic   SCHAAF PETER
• [mrtg] Re: Info on FR graphs...   David C Prall
• [mrtg] Re: Perl logic   SCHAAF PETER
• [mrtg] How do I find 'every' MIB on my machine?   Robin Burger
• [mrtg] bat file   Chuck.Curto at tmcaz.com
• [mrtg] Re: How do I find 'every' MIB on my machine?   Stieers, Ken
• [mrtg] ANNOUNCE: version 0.9 of 14all.cgi   lists at ripper.informatik.uni-ulm.de
• [mrtg] Log / Graphs Not updated   Archer, Kyle
• [mrtg] Re: frequency   Alexander Fichman
• [mrtg] Re: bat file   Neil Calvert
• [mrtg] Re: External programs with MRTG   Alexander Fichman
• [mrtg] Re: bat file   David C Prall
• [mrtg] MRTG question.   Lu, Frank
• [mrtg] Auto-Initialization of MRTG under NT   Alexander Fichman
• [mrtg] Re: MRTG question.   Neil Calvert
• [mrtg] Cisco Router Monitoring   Isaac
• [mrtg] Re: can't ip number to ip address   Jay Hennigan
• [mrtg] Re: Cisco Router Monitoring   David C Prall
• [mrtg] Re: Cisco Router Monitoring   Stieers, Ken
• [mrtg] New Install on Linux   David E. Mazza
• [mrtg] Re: Log / Graphs Not updated   Joe Loiacono
• [mrtg] can't ip number to ip address   Beckie Pack
• [mrtg] Re: can't ip number to ip address   Beckie Pack
• [mrtg] Re: New Install on Linux   Neil Calvert
• [mrtg] Re: bat file   Oyler, Michael
• [mrtg] more contributed configs?   Justin Shore
• [mrtg] Re: MRTG question.   Paul Maskelyne
• [mrtg] how can I schedule <5 minute intervals?   Alexander Fichman
• [mrtg] Re: how can I schedule <5 minute intervals?   Justin Shore
• [mrtg] Re: more contributed configs?   Stieers, Ken
• [mrtg] XYLAN OnmiSwitches CPU Utilization   Meisner, Jeff D
• [mrtg] Re: how can I schedule <5 minute intervals?   Alex van den Bogaerdt
• [mrtg] Re: New Install on Linux   David E. Mazza
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   R. Brockway
• [mrtg] Re: OIDS/cisco frame subinterface multipoint   Stieers, Ken
• [mrtg] port reconfigurations   SCHAAF PETER
• [mrtg] Re: int error   Mohammed, Hadiza L
• [mrtg] Re: port reconfigurations   Neil Calvert
• [mrtg] Re: how can I schedule <5 minute intervals?   Alex van den Bogaerdt
• [mrtg] Re: how can I schedule <5 minute intervals?   Alexander Fichman
• [mrtg] Re: how can I schedule <5 minute intervals?   Alex van den Bogaerdt
• [mrtg] Query re Packet Stats   Rick Horowitz
• [mrtg] Total bandwidth usage over a month   Jake
• [mrtg] Maybe this will be a better question...   Rick Horowitz
• [mrtg] hrProcessorLoad name doesn't exist?   Robin Burger
• [mrtg] Re: hrProcessorLoad name doesn't exist?   Niels Baggesen
• [mrtg] Total bandwidth usage over a DAY?   Justin Shore
• [mrtg] Re: Total bandwidth usage and My BIG problem   Frank Keeney
• [mrtg] Re: Total bandwidth usage and My BIG problem   Rob Walker
• [mrtg] Re: Total bandwidth usage and My BIG problem   Christopher E. Brown
• [mrtg] Re: Total bandwidth usage and My BIG problem   Frank Keeney
• [mrtg] Info required on mrtg graphs with 3rd party mib data   Prasenjit Lahiri
• [mrtg] Re: Total bandwidth usage and My BIG problem   Justin Shore
• [mrtg] Re: Updated Portmaster scripts   Tobias Oetiker
• [mrtg] MRTG and SNMPv2 64 bit counters   Giuseppe Larosa
• [mrtg] Re: Total bandwidth usage and My BIG problem   Chris Josephes
• [mrtg] Re: Maybe this will be a better question...   David C Prall
• [mrtg] asking for MRTG config files for true64 Unix (digital Unix)   lombardi emanuele
• [mrtg] mrtg and billing WAS: Re: Re: Total bandwidth usage and My BIG problem   Rob Walker
• [mrtg] question about http://teak.wiscnet.net/nrg/NoSuchSD.html   Rob Walker
• [mrtg] Re: Easiest way to map OIDs to MIB text?   David C Prall
• [mrtg] labels in the .cfg files.   Rob Walker
• [mrtg] Re: Easiest way to map OIDs to MIB text?   Rob Walker
• [mrtg] Re: mrtg and billing WAS: Total bandwidth usage and My BIG problem   Chris Josephes
• [mrtg] Re: Easiest way to map OIDs to MIB text?   David C Prall
• [mrtg] Easiest way to map OIDs to MIB text?   Joe Loiacono
• [mrtg] H2 detect when MRTG is down on WinNT ?   Fabien Lebargy
• [mrtg] Re: H2 detect when MRTG is down on WinNT ?   David C Prall
• [mrtg] Re: mrtg and billing WAS: Total bandwidth usage and My BIG problem   Rob Walker
• [mrtg] Re: H2 detect when MRTG is down on WinNT ?   Christian Terek
• [mrtg] Re: mrtg and billing WAS: Total bandwidth usage and My BIG problem   Chris Josephes
• [mrtg] Problems getting NT4(sp5) info   Joe Klemmer
• [mrtg] Re: mrtg and billing WAS: Total bandwidth usage and My BIG problem   Rob Walker
• [mrtg] Re: mrtg and billing WAS: Total bandwidth usage and   Alex van den Bogaerdt
• [mrtg] PROBLEM: rateup died from Signal 11   Todd K. Watson
• [mrtg] Re: Problems getting NT4(sp5) info   David C Prall
• [mrtg] Re: Problems getting NT4(sp5) info   Joe Klemmer
• [mrtg] 3com 3300tx MIB   Rick Horowitz
• [mrtg] Re: 3com 3300tx MIB   David C Prall
• [mrtg] MRTG Newbie question about Exchange   Mary (Mary Anthes)
• [mrtg] Re: MRTG Core Dump   alain.aube at hrdc-drhc.gc.ca
• [mrtg] Re: 3com 3300tx MIB   Mark Hendricks
• [mrtg] funny graphs for NT cpu usage?   Jim Jones, Jr.
• [mrtg] Re: funny graphs for NT cpu usage?   David C Prall
• [mrtg] as5300 MIB   Noel Gabriel
• [mrtg] Re: funny graphs for NT cpu usage?   Jim Jones, Jr.
• [mrtg] Re: as5300 MIB   John McKay
• [mrtg] Re: as5300 MIB   kikino su sardu
• [mrtg] Printer Config's   Leonard Robert-G2091C
• [mrtg] Looking for useful mrtg cfg file for monitoring APCC SmartUPS 2200   Dan Larsson
• [mrtg] Re: question about http://teak.wiscnet.net/nrg/NoSuchSD.html   lists at ripper.informatik.uni-ulm.de
• [mrtg] Oggetto: Re: as5300 MIB   Giorgio Torassa
• [mrtg] SV: Re: question about http://teak.wiscnet.net/nrg/NoSuchSD.html   Dan Larsson
• [mrtg] Re: SV: question about http://teak.wiscnet.net/nrg/NoSuchSD.html   Archer, Kyle
• [mrtg] Re: funny graphs for NT cpu usage?   David C Prall
• [mrtg] 4 hour graph (was: question about http://teak.wiscnet.net/nrg/NoSuchSD.html)   lists at ripper.informatik.uni-ulm.de
• [mrtg] Timing   Neil Calvert
• [mrtg] A question   Payman N
• [mrtg] Re: Timing   Larry Sheldon
• [mrtg] Re: A question   David C Prall
• [mrtg] Re: Printer Config's   Henry Steinhauer
• [mrtg] Re: Timing   Neil Calvert
• [mrtg] Re: as5300 MIB   Rick Horowitz
• [mrtg] truncating oversized request?   Justin Shore
• [mrtg] Re: question about http://teak.wiscnet.net/nrg/NoSuchSD.html   Rob Walker
• [mrtg] Redback SMS-1000   Marc Sonnenberg
• [mrtg] Re: as5300 MIB   Rob Walker
• [mrtg] Xyaln and ATM interface monitoring... please help   lfiddler at us.ibm.com
• [mrtg] Xyaln and ATM interface monitoring... please help   lfiddler at us.ibm.com
• [mrtg] Xyaln and ATM interface monitoring... please help   lfiddler at us.ibm.com
• [mrtg] Please disregard previous Xylan ATM question.... now have a GETif question..ifNumber???   lfiddler at us.ibm.com
• [mrtg] Re: Please disregard previous Xylan ATM question.... now have a GETif question..ifNumber???   Henry Steinhauer
• [mrtg] Re: Xyaln and ATM interface monitoring... please help   Chairman of the Bored
• [mrtg] MIBS and Cisco   Isaac
• [mrtg] Using non-standard MIBs   Stojan Rancic
• [mrtg] Bandwidth Totals   Mike Terebessy
• [mrtg] Re: How do I find 'every' MIB on my machine?   Jon Miner
• [mrtg] Re: Using non-standard MIBs   Jon Miner
• [mrtg] Re: Using non-standard MIBs   Stojan Rancic
• [mrtg] Re: Using non-standard MIBs   Alex van den Bogaerdt
• [mrtg] MRTG/UseRRDTool - Bits vs. Bytes?   Mark T. Ganzer
• [mrtg] Re: MRTG/UseRRDTool - Bits vs. Bytes?   Alex van den Bogaerdt
• [mrtg] Re: Using non-standard MIBs   Stojan Rancic
• [mrtg] BAY DISt. 5000 AND BAY 28200   Claus Lind
• [mrtg] Re: MIBS and Cisco   Neil Calvert

Last message date: Sun Oct 31 16:24:01 MET 1999
Archived on: Wed Jan 24 10:42:56 MET 2007

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...