[mrtg] Re: OIDS/cisco frame subinterface multipoint

[Stieers, Ken]

Bytes.  An octet is 8 bits. 

Ken 


****************************************
Ken Stieers
Lan Administrator
Dain Rauscher Information Services
(612)607-8924


> -----Original Message-----
> From: R. Brockway [mailto:rockie at apk.net]
> Sent: Wednesday, October 27, 1999 8:09 AM
> To: Stieers, Ken
> Cc: mrtg at list.ee.ethz.ch
> Subject: RE: [mrtg] OIDS/cisco frame subinterface multipoint
> 
> 
> Ken, 
> 
> Thank you again for this information, as it has proved very 
> helpful. One
> question, does octets translate to bits or bytes? 
> 
> -rockie
> 
> On Wed, 20 Oct 1999, Stieers, Ken wrote:
> 
> > Have you tried:
> > 
> >     'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
> >     'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'
> > 
> > which when used in the form:
> > 
> > frInOctets.pp.dd&frOutOctets.pp.dd:community at cisco.router
> > 
> > where pp is the physical port that the frame relay pvc is
> > defined on and dd is the DLCI of the pvc gets you the in
> > and out octets for just that pvc.
> > 
> > Ken
> > 
> > > -----Original Message-----
> > > From: R. Brockway [mailto:rockie at apk.net]
> > > Sent: Wednesday, October 20, 1999 2:20 PM
> > > To: mrtg at list.ee.ethz.ch
> > > Subject: [mrtg] OIDS/cisco frame subinterface multipoint
> > > 
> > > 
> > > Does anyone know of any OIDS that have the ability to gather 
> > > in/out stats
> > > on each dlci entry in a frame-relay serial multipoint 
> subinterface?
> > > 
> > > in example below (SDSL distribution over T3) each PVC is 
> routed over
> > > multipoint subinterface with static IP/DLCI map. i looked in the
> > > CISCO-FRAME-RELAY-MIB.oid list and couldn't find anything 
> > > that would give
> > > me stats on individual pvcs set up like this. 
> > > 
> > > 
> > > interface Hssi2/1
> > >  no ip address
> > >  no ip redirects
> > >  no ip directed-broadcast
> > >  no ip proxy-arp
> > >  encapsulation frame-relay IETF
> > >  bandwidth 9474
> > >  keepalive 5
> > >  frame-relay lmi-type ansi
> > > !
> > > interface Hssi2/1.7 multipoint
> > >  ip address 192.168.1.1 255.255.255.0
> > >  frame-relay map ip 192.168.1.2 32 IETF
> > >  frame-relay interface-dlci 32
> > >  frame-relay map ip 192.168.1.3 34 IETF
> > >  frame-relay interface-dlci 34
> > >  frame-relay map ip 192.168.1.4 36 IETF
> > >  frame-relay interface-dlci 36
> > > 
> > > thanks. 
> > > 
> > > -rockie
> > > --
> > > R. Brockway			APK Net	Systems Administrator
> > > 
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a 
> message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > > 
> > 
> 
> --
> R. Brockway			APK Net	Systems Administrator
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg