[mrtg] Xyaln and ATM interface monitoring... please help

[lfiddler at us.ibm.com]

Still working on same problem... but getting a little closer now.  Can
anyone tell by my config file what might be incorrect here?

Here is my config portion:

Target[ipaddress.interface]:
.1.3.6.1.4.1.800.2.4.3.1.1.4.3001&.1.3.6.1.4.1.800.2.4.3.1.1.7.3001:community at ipaddress
MaxBytes[ipaddress.interface]: 19375000
Title[ipaddress.interface]: USBLXY601 (): CSM native port is multi-mode OC3
PageTop[ipaddress.interface]: <H1>Traffic Analysis for CSM native port is
multi-mode OC3
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>USBLXY601 in Boulder 9W</TD></TR>
   <TR><TD>Maintainer:</TD><TD>Commercial Internet Network Team</TD></TR>
   <TR><TD>Interface:</TD><TD>CSM native port is multi-mode OC3
(3001)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>19.4 MBytes/s (atm)</TD></TR>
  </TABLE>

BTW.... the interface is 3001.  My mib browser said that 3 was the slot and
1 was the port.  So I need to add it on to the end of the OID -- 3.1,
right?


Here is the error when I run mrtg on the config file:

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.4.20.1.2.0.1.3.6.1.4.1.800.2.4.3.1.1.7.3001)
SNMPv1_Session (remote host: "IP address" [IP address].161
                  community: "xxxxxxxxxxxxx"
                 request ID: 946032438
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ipAdEntIfIndex..1.3.6.1.4.1.800.2.4.3.1.1.7.3001 on
xxxxxxxxx
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10)
SNMPv1_Session (remote host: "IP address" [IP address].161
                  community: "xxxxxxxxxxxxx"
                 request ID: 946032439
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets. ifOutOctets. sysUptime sysName on
xxxxxxxxxxxxx
SNMPGET: Failed to reach target:
".1.3.6.1.4.1.800.2.4.3.1.1.7.3001:xxxxxxxxxxx


I am a newbie to MIB, SNMP, OID and the like.  I am learning a lot, but
lots to go yet.  Any information would be very helpful!
Thanks in advance!!

Lisa Fiddler
IBM Global Services
Network Measurements -- Commercial Internet Team
Raised Floor, Building 025
(Outside):  303-924-6290
(Tie/Line): 303-263-6290
Pager:        303-878-0157
Madness takes it's toll.... Please have exact change ready.


--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg