[mrtg] Re: CPU Temp and Processor Load on Cisco 3640

[Daniel J McDonald]

3640 doesn't support temperature (that's only on the 7xxx series).

I use the following:
Target[Austin3640_cpu]:
1.3.6.1.4.1.9.9.109.1.1.1.1.5.1&1.3.6.1.4.1.9.9.109.1.1.1.1.3.1:public at 172.1
6.0.1
Target[Austin3640_mem]:
1.3.6.1.4.1.9.9.48.1.1.1.7.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:public at 172.16.0.1

The OID's from the monolithic mib are going to be EOL'ed one of these days,
so we might as well use the new mibs instead...

Daniel J McDonald - CCIE 2495, CNX
Principal Network Specialist
Digicon Technologies
http://www.digicontech.com
dmcdonald at digicontech.com

Digicon - A Cisco Systems Partner, Premier Certified.


> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Jim Wurster
> Sent: Friday, August 11, 2000 9:09 AM
> To: MRTG
> Subject: [mrtg] CPU Temp and Processor Load on Cisco 3640
>
>
>
> Hello,
> 	I am trying to learn how to custom set up the config
> file for CPU, Temp and
> Process. I have loaded the Cisco.proccess.mib.my in my
> mrtg.cfg file but how
> do I figure out how to call the target? Can you specify the
> mib files when
> running cfgmaker? If so how.
>
> Little on my system.
> 	MRTG= 2.8.12
> 	SNMP= enable envmon (which should be the CPU/Temp/Load
> - Correct?)
>
> I think I am either a going at this all wrong or b close but
> not finishing
> something correct.
>
> Sorry if this is a basic question, Just trying to learn.
>
> Jim Wurster                                       jwurster at maverix.net
> Team Maverix                                          Maverix.net Inc.
> http://www.maverix.net/                                   312-224-3117
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi