[mrtg] Re: some special use...

[Marc Duchesneau]

Bryan,

	You can use a ConnectUPS
(http://www.powerware.com/2products/accessories/conups.htm) to connect your
UPS to the network.  Of course, if you try to run the cfgmaker of MRTG, it
will try to monitor the 3 ports on the ConnectUPS which is not was this is
all about..

At 08:38 AM 2/14/2000 -0500, Bryan Socha wrote:
>Accually, I have a similar need but first I have to figure out where the
>network cable goes :)
>
>
>Bryan Socha
>Network Engineer
>UGO Networks, Inc.
>
>Phone: 212-624-3362
>Cell: 917-439-5503
>
>Hi everyone,
>
>	Does anyone have tried to monitor a Powerware UPS with MRTG ?  I
>have
>tried several setup using OID (the standart one and the proprietary) but
>mrtg just don't seems to pick up anything from my UPS.  I would like to
>monitor the load and some others stuff.  There is no log file generated
>currently but i don't get any error message when i run the MRTG file.  I am
>communicating with my UPS via a ConnectUPS.  
>
>Here is what i got:
>
>Target[xxx.xxx.xxx.xxx_load]:
>1.3.6.1.4.1.534.4.4.5.0&1.3.6.1.4.1.534.4.4.5.0:public at xxx.xxx.xxx.xxx
>MaxBytes[xxx.xxx.xxx.xxx_load]: 100
>Title[xxx.xxx.xxx.xxx_load]: UPS Load 
>WithPeak[xxx.xxx.xxx.xxx_load]: dwmy
>Options[xxx.xxx.xxx.xxx_load]: growright, absolute, gauge
>YLegend[xxx.xxx.xxx.xxx_load]: percent 
>ShortLegend[xxx.xxx.xxx.xxx_load]: %
>PageTop[xxx.xxx.xxx.xxx_load]: <H1>Load Analysis for UPS Load </H1>
> <TABLE>
>   <TR><TD>System:</TD><TD>UPS in the computer room</TD></TR>
>   <TR><TD>Maintainer:</TD><TD>a lucky soul</TD></TR>
>   <TR><TD>IP:</TD><TD> (xxx.xxx.xxx.xxx)</TD></TR>
>   <TR><TD>Max Load:</TD>
>       <TD>??????</TD></TR>
>  </TABLE>
>
>Any advice would be welcome
>
>Marc
>



----------------------------------------------------------------------------
Marc Duchesneau 
Technicien en Hardware & Réseau
Les Systèmes Électroniques Matrox 
1055 St-Régis 
Dorval, Québec 
H9P 2T4 

tél.: (514) 822-6000 ext.2321 
fax:  (514) 822-6262 
<http://www.matrox.com/>www.matrox.com
E-Mail:mduches1 at matrox.com 
-----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg