[mrtg] Re: Question #001

[Stieers, Ken]

Its probably something simple like changing a target line from 

Target[internet]: 0:public at routerip

to 

Target[internet]: 1:public at routerip


The number changed in the lines above are the port number on the router that
you want to watch. 

HTH, 

Ken 
P.S.  You should probably read the docs, specifically the config.html that
comes with MRTG


> -----Original Message-----
> From: RalphM1050 at aol.com [mailto:RalphM1050 at aol.com]
> Sent: Thursday, July 06, 2000 12:47 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Question #001
> 
> 
> 
> I am a consulting engineer.  I am new to MRTG.  A local ISP 
> has ask me to 
>  help them with the configuration file for MRTG.  
>  
>  They have a 2501 router which connects their LAN to the 
> Internet.  They 
> would 
>  like to
>  monitor the bandwidth that travels through Serial interface 
> S1 of that 
> router.
>  The MRTG program is set up on one of their NT workstations.  
> They were using 
>  MRTG a while back, when our Internet T1 was on Serial 
> Interface S0 of the 
>  router, but now that they have moved to S1, it doesn't work. 
>  I am trying to 
>  figure out how to change the configuration file to 
> accomodate the Serial 
>  Interface change from S0 to S1 on the router.  Any 
> suggestions or help you 
>  can email to me would be appreciated.
>  
>  Thank you,
>  Ralph Mitchell
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi